Kytronics Card Dispensers & Systems

BHM-2200 Card dispenser with barcode reader BHM-2200 Card dispenser The BHM-2200 Card dispenser with barcode reader for up to 500 cards. This dispenser has a built in CCD 1D, 2D barcode reader and is able to process all common barcodes. The integrated sensors report a low card or card empty warning in the card magazine. Optional with bezel as an card insertion aid or with a shutter to protect the dispenser against vandalism. Further the device has a card capture function to return cards which are e.g. defective. This cards will be collected in a separate capture card box or over a card slide under the dispenser. The following barcodes can be processed: All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. THe BHM-2200 car dispenser with CCD 1D, 2D barcode reader for up to 500 cards. Selectivly with standard rubber roller or push type mechanism for card transportation. Two sensors for low card and card epmpty waring. With card capture function for e.g. defective cards. Optional with bezel or shutter. Avialable with the interface RS-232. The following barcodes can be processed: All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. Despription Note Model/Typ BHM-/BHR-2200 card dispenser  Barcode reader 1D, 2D Barcode reader Card magazine Stacker Card transportation Roller type Push type mechanism BHM-2200 BHR-2200  Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  Magazine capacity 100, 200, 300, 500  cards  Interface RS-232 Card empty sensor Yes  Low card warning sensor 20, 40, 60, 80, 100 cards  Card capture function Yes  Capture card box Yes (30 cards) for returned cards Dimensions 100 cards 124 x 122 x 172 mm 200 cards 124 x 122 x 248 mm 300 cards 124 x 122 x 324 mm 500 cards 124 x 122 x 476 mm Bezel + 17,4 mm Shutter + 30,2 mm  Power consumption DC 24V (+-5%) "

BIM-6600 Card dispenser with barcode reader and 2 exchange cartridges BIM-6600 Card dispenser The BIM-6600 Card dispenser with barcode reader and 2 exchange cartridges for up to 1.000 cards. This dispenser has a build in CCD 1D/2D barcode reader. With this reader all common barcodes can be processed. The integrated sensors reports low card and card empty warning in the cartridges. Optional with bezel as insertion aid for cards or shutter as a protection from vandalism. The BIM-6600 has a card capture function to return cards into the system in case they are e.g. defective. This returned cards are stored in a card capture box or for more capacity over a card slide under the dispenser in a separate box. The dispenser is available with the interface RS-232. The following barcodes can be processed: QR-Code, All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIM-6600 card dispenser with barcode reader for up to 1.000 cards. With two exchange cartridges for quick and easy refilling of the device. Equipped with CCD 1D/2D barcorde reader for all common codes. Optional with bezel or shutter. With card capture function with capture box or card slide. Avialable with the interface RS-232. Description Note Model/Typ BIM-6600 Card dispenser Card magazine 2 Exchange cartridges Card reader 1D/2D Barcode reader Card transportation Roller Card type ISO 7810 85,725 x 53,975 mm 0,2 - 1,0 mm Thickness Low card warning Yes Card empty sensor Yes Interface RS-232 Card capture function Yes Card capture box optional Card slide optional Shutter optional Bezel optional Dimensions 200 cards (4x) 286,6 x 450,5 x 293 mm 300 cards (4x) 286,6 x 450,5 x 395 mm 500 cards (4x) 286,6 x 450,5 x 545 mm Bezel+ 17,4 mm Shutter + 30,2 mm Power consumption DC 24V, 1,5 A "

BIM-7000 Card dispenser with barcode reader and 4 exchange cartridges BIM-7000 Card dispenser The BIM-7000 card dispenser with barcode reader and 4 exchange cartridges for up to 2.000 cards. With the integrated CCD 1D/2D barcode reader this dispesner can process all common barcodes. The build in sensors gives low card and cartridge empty warning. Optinal available with bezel or shutter to prevent vandalism. Further the device has an card capture function. In case a card should be defective or not collected, the card will be returned into the device. This cards are stored in a separate box or over a card slide under the machine. The following barcodes can be processed:QR-Code, Alle UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirektional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIM-7000 card dispsner with barcode reader for up to 2.000 cards. With 4 exchange cartridges for a quick and easy refilling of the dispenser. Equipted with CCD 1D/2D barcode reader for all common barcodes. Optional with bezel or shutter to protect the dispenser from vandalism. With card capture function and card bin. Available with the interface RS-232. Description Note Model/Typ BIM-7000 card dispenser with barcode reader Card magazine 4 exchange cartridges Card reader 1D/2D Barcode reader Card transportation Roller Card type ISO 7810 85,725 x 53,975 mm 0,2 - 1,0 mm card thickness Low card warning sensor Yes Card empty sensor Yes Interface RS-232 Card capture function Yes Card capture box optional Card slide optional Shutter optional Bezel optional Dimensions 200 cards (4x) 286,6 x 450,5 x 293 mm 300 cards (4x) 286,6 x 450,5 x 395 mm 500 cards (4x) 286,6 x 450,5 x 545 mm Bezel + 17,4 mm Shutter + 30,2 mm Power consumption DC 24V, 1,5 A "

BIS-1000 Card dispenser with encoder and barcode reader BIS-1000 Card dispenser The BIS-1000 Card dispenser and collector with card reader/encoder for magnetic, chip, RFID cards and barcode reader. This encoding system has a card dispenser for up to 500 cards, an encoding station and a card collector for up to 500 cards. In case a card should be defective the system is able to sort this card out. This card will be separated over a card switch and stored under the system in a external box. Available with the interface RS-232. The following barcodes can be processed: QR-Code, All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIS-1000 card dispenser with collector and encoder/reader. This model can process magnetic, chip, RFID and barcode cards. All common barcodes can be processed. With sorting function for defective cards. With build in sensors for low-card and magzine empty/full warning. Available with the interface RS-232. Description Note Model/Typ BIS-1000 Encoding station Card mgazine Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 track reading + encoding HiCo + LoCo, ISO 7810-13 Chip cards ISO 7816 reading + encoding RFID cards ISO 14443A Mifare or comp. reading + encoding Barcode reader 1D/2D reading Card magazine capacity 2 x 300 , 2 x 500 cards with side door for lateral refill Interfaces RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Sort out function Yes defective cards Box for sort out cards Yes Card slide optional Dimensions 200 cards 168,3 x 578,6 x 306 mm 300 cards 168,3 x 578,6 x 386 mm 500 cards 168,3 x 578,6 x 546 mm Power input AC 110V-AC 220V "

BYT-1000 Motorized barcode reader BYT-1000 Barcodeleser The BYT-1000 Motorized barcode reader CCD 1D for all common barcodes. This card reader is equipped with a card feeder which allows the device to also return cards. This is the card capture function in case a card should be e.g. defective. Optional with bezel or shutter to protect the reader against dirt or vandalism. The following barcodes can be processed: All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirektional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BYT-1000 motorized barcode reader CCD 1D, for all common barcodes. With integrated card feeder for card return. Optional with bezel or shutter to protect the reader against dirt and vandalism. The following barcodes can be processed: All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. Description Note Model/Typ BYT-1000 Motorized barcode reader Barcodeleser 1D/2D barcode reader Card transportation Roller Card size ISO 7810 85,725 x 53,975 mm Interface RS-232 Card capture function Yes Shutter optional Bezel optional Dimensions 102 x 135 x 224 mm Bezel + 17,4 mm Shutter + 30,2 mm Power consumption DC 24V, 1,5 A "

CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. CCM-1000 Card collector The CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. This model has a stacker type card magazine for up to 500 cards. It can be customized according to your requirements. With card capture function to sort out e.g. defective cards. This cards will be stored in a separate box or droped under the device into a external box. Another option is the card drop function, if a card should be returned e.g. in a take out port of a vending machine. The CCM-1000 has a high card processing speed of 2,3 - 4,0 sec./cards. Available with the interfaces RS-232 or RS-422. The CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. The magnetic tracks can be processed simultane. Optional with HiCo/LoCo selector for magnetic cards. Card magazine capacity: 100, 200, 300 or 500 cards (76mm). With card capture function for e.g. defective cards. High speed card processing in 2,3-4 sec. per cards. Available with the interfaces RS-232 or RS-422. Description Note Model/Type CCM-1000 Card collector Card magazine Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card reading + encoding 3 track simultan HiCo+LoCo (selector optional)  Chip card reading + encoding ISO 7816  RFID card reading + encoding ISO 14443 Mifare  or comp. Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Ja Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes  Auffangbox Yes Card-Drop Yes Shutter electr. optional Bezel optional  HiCo/LoCo Selector optional  Power consumption DC 24V, 3A "

CCM-2000 Card collector with encoder and exchange cartridge CCM-2000 Card collector The CCM-2000 Card collector with encoder for magnetic, chip and RFID cards and exchange cartridge for up to 500 cards. The exchange cartridge allows a quick and easy emptying of the device. This collector can be customized to exactly meet your requirements. It has a card capture function for e.g. defective cards. This cards will be sorted out and stored in a separate box or under the device in an external box. Another option is the card-drop function, to (return) a card into a take out port of a vending machine. The CCM-2000 has a high card processing speed of 2,3 -4,0 sec./card. Further this model is also available with a housing. Optional with RS-232, RS-422 or TTL interface. The CCM-2000 card collector with encoder and exchange cartridge for up to 500 cards. With card reader/encoder for magnetic, chip and RFID cards. Available with HiCo or LoCo or switch for magnetic cards. With exchange cartridge for quick and easy emptying of the collector. With card capture function and separate box to store them. With card-drop function for take out port of vending machines. Further options, electr. shutter or bezel, housing. Available with the interfaces RS-232, RS-422 or TTL. Description Note Model/Type CCM-2000 card  collector Card magazine Exchanage cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card reading + encoding 3 track simultan HiCo/LoCo or switch Chip card reading + encoding ISO 7816 / 8 contacts RFID card reading + encoding ISO 14443 Mifare or comp. Card magazine capacity 200, 300, 500 cards Interface RS-232, RS-422, TTL Magazine full sensor Yes Card capture function Yes Capture card box Yes Shutter electr. optional Bezel optional  HiCo/LoCo switch optional  Further options Housing version Dimensions Hybrid. Magnetic, Chip, RF 200 cards 143 x 343 x 341 mm 300 cards 143 x 343 x 417 mm 500 cards 143 x 343 x 569 mm Only RF-cards 200 Karten 143 x 303 x 341 mm 300 Karten 143 x 303 x 417 mm 500 Karten 143 x 303 x 569 mm Bezel + 17 mm Shutter + 44 mm  Power consumption DC 24 v, 3A "

CCM-4000 Card collector with encoder and 2 exchange cartridges CCM-4000 Card collector The CCM-4000 Card collector with reader/encoder for magnetic, chip and RFID cards. With 2 exchange cartridges for up to 1.000 cards (0,76 mm). This model can read all 3 magnetic tracks simultaneous and encode in HiCo and/or LoCo. The two exchange cartridges are controllable separately and allows the processing of two different card types. In case a card is e.g. defective or unvalid, this card can be sorted out by the device with the card capture function. This cards will be stored in a separate capture card box. Optional with bezel or shutter as protection against dirt and vandalism. The integrated sensors are monitoring the card level in the magazines and gives warning if one is full. The CCM-4000 card collector with 2 exchange cartridges. Card magazine capacity for up to 1.000 cards (2 x 500). With reader/encoder for magnetic, chip and RFID cards. Magnetic cards HiCo and/or LoCo simultaneous processing. Separately controllable magazines for two diffenrent card type processing. With card capture function and separate box. Optional with bezel or shutter. With sensors for card level monitoring Available with RS-232 interface. Description Note Model/Type CCM-4000 card collector Card magazine 2 exchange cartridges Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card 3 tracks simultaneous reading + encoding HiCo and/or LoCo  Optional switch  Chip card reading + encoding ISO 7816 / 8 contacts  RFID reading + encoding ISO 14443 Mifare or comp. Card magazine capacity 2 x 300, 2 x  500 cards Interface RS-232, TTL Magazine sensor Yes Magazine inside Magazine full Yes Card capture function Yes Captrue card box Yes (30 cards) Shutter optional Bezel optional  Dimensions Hybrid: Magnetic, Chip, RFID 2 x 300 cards 287 x 364 x 395 mm 2 x 500 cards 287 x 364 x 455 mm Only RFID reader 2 x 300 cards 287 x 281 x 395 mm 2 x 500 cards 287 x 281 x 455 mm Bezel + 17 mm Shutter + 44 mm  Power consumption DC 24V, 3A "

CCM-5000 Card collector with encoder and 2 security cartridges CCM-5000 Card collector The CCM-5000 card collector with encoder for magnetic, chip and RFID cards. With two security cartridges for up to 1.000 cards. This collector was designed with special secutity features, appropriate to the CIM-5000 card dispenser. The security cartridges are particularly suitable for value cards like prepaid, gift cards etc. and also have their own memory and ID. The cartridges can not be opened manually (without damaging them), but only mechanically with the CIM-5000. This ensures the loss-free transportation and storage of value cards. The device allows an intelligent monitoring of all card processes through several build-in sensors. They report a critical cared quantity and also if a cartridge is empty. Further defective cards can be sorted out and put in a separate capture card box. The CCM-5000 card collector with encoder and security cartridge for up to 1.000 cards. The device and read and encode magnetic, chip and RFID cards. Card can also be sorted out in case they are defective and stored in a separate box. With automatic baudrate change (9.600-19.200 bps) over the interface. Intelligent monitoring of all card processes. With build in sensors for: card level, card empty and capture card box. The unique clutch system ensures the card separation. Card thickness is adjustable from 0,76 - 1,0 mm. Available with the interface RS-232. Description Note Model/Typ CCM-5000 Card collector Card magazine Exchange cartridge Security cartridge Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 Spuren reading+encoding HiCo+LoCo, ISO 7810-13 Chip cards reading+encoding ISO 7816 RFID cards reading+encoding ISO 14443A Mifare contactless chip cards Card magazine capacity 2 x 200, 2 x 300 , 2 x 4002 x 500, 2 x 750 cards Interface RS-232 Card empty sensor Ja Low card warning sensor 20, 40, 60, 80, 100 Karten/optional Card capture function Yes Capture card box Yes (30 Karten ) for defective cards Card level sensor box Yes Weiter Optionen Card Drop Version Longlife magnetic head Bezel or Shutter Housing Version &nbsp\"

CDC-1000 Card dispenser with collector and RFID CDC-1000 The CDC-1000 card dispenser with collector and RFID card reader and encoder. This dispenser can also collect cards and lead them back in the card magazine, so they can be dispensed again. In case a card is defective, the system will sort it out and store it in a separate box. The optional card reader/encoder can process RFID cards ISO 14443. Further options are a bezel or a shutter (against dirst and vandalism). Available with the interfaces RS-232 or RS-422. The CDC-1000 card dispenser and collector for up to 100 cards. Optional with RFID reader/encoder for ISO 14443 cards. Further options are a bezel or a shutter (against dirt and vandalism). With sensors for low-card and magazine empty warning. Defecitve cards will be sorted out by the dispenser into a box. Available with the interfaces RS-232 or RS-422. Description Note Model/Type CDC-1000 card dispenser and collector Card magazine Stacker Card transportation Roller RFID cards reading + encoding ISO 14443 Mifare or compatible Card thickness 0,76 - 1,0 mm  Card size ISO 7810 85,725 x 53,975 mm Card magazine capacity 100 (0,76 mm) Interface RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes  defective cards Capture card box optional Bezel optional Shutter optional Dimensions 99 x 270 x 195 mm Bezel + 17,4 mm Shutter +44 mm  Power consumption DC 24V (+-5%) "

CHM-1000 Card dispenser with encoder for magnetic, chip and RFID cards CHM-1000 Card dispenser The CHM-1000 Card dispenser with encoder for magnetic, chip and RFID cards (contacless cards). This model is available in two versions, with metal frame or with plastic frame. The plastic frame version is very suitable for contactless RFID card processing, as the trouble-free operation is ensured. This model is furhter equipped with a push-type mechanism for card transportation. Our pus-type models were disigned specially for cards, which are diffcult to separate because of their material (statically charged) or which are frequently used (canteens, car wash etc.). In case a card was not taken out of the dispenser by the customer, the CHM-1000 has a card capture function, to return the card into the device and stored in a capture card box. In addition we offer the options bezel or shutter (as protection against dust and vandalism). Also a housing version is available. The CHM-1000 can also be combined with a thermal ReWrite-pinter. This cards can be printed and reprinted up to 500 times, without using consumables like color ribbons or toner. Feel free to ask for more information if you are interested in this version. The CHM-1000 card dispenser with encoder for magnetic, chip and RFID cards. Available with metal or plastic frame feeder. The plastic version is suitable for DesFire/RFID cards for trouble-free operation. With push-mechanism for difficult to separate cards (statically charged). Easy to adjust card thickness between 0,76 - 1,0 mm. With card capture function and capture card box or card slide. Optional with bezel or shutter (against dust and vandalism) Also available with housing. Further option is the thermal ReWrite printer. Description Note Model/Typ  CHM-1000 card dispenser with encoder Card magazine Stacker Card transportation push-mechanism no rubber roller Thickness 0,76 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm Magnetic cards 3 track ISO reading + encoding LoCo or HiCo or autom. switch Magnetic head Standard 0,5 Mio passes Longlife magnetic head 3 Mio. passes (1 pass = 1x forward + 1x back) Chip cards ISO 7816 Chip cards contact station reading + encoding RFID cards (contacless) ISO 14443 Mifare or compatible reading + encoding Printer Opional Thermal ReWrite Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Yes card magazine Low card warning sensor optional for 500 card capacity magazine warning at: 25, 50, 75 cards  Card capture funciton Yes  Capture card box  optional for metal frame version for returned cards Card slide optional (insted of capture card box) for returned cards Bezel optional Shutter electr. optional Card Drop optional  Housing optional  Dimensions (LxWxH) with metal card feeding module: 100 cards 403 x 167 x 161 mm 200 cards 403 x 167 x 237 mm 300 cards 403 x 167 x 323 mm 500 cards 403 x 167 x 495 mm with plastic card feeding module: 100 cards 508 x 180 x 172 mm 200 cards 508 x 180 x 248 mm 300 cards 508 x 180 x 326 mm 500 cards 508 x 180 x 476 mm  Power consumption DC 24V "

CHR-1000 card dispenser with encoder for magnetic and chip cards and push-type CHR-1000 card dispenser The CHR-1000 card dispenser with encoder and push-type mechanism. This model can read magnetic cards and read and encode chip cards. The push-mechanism ensured the single output of every card. This mechanism is very suitable for difficult to separate cards (e.g. staticall charged). With high dispensing speed for fast card operations. If a card was not collected by the customer or is defective, the CHR-1000 can return the cards into the dispenser with the card capture function. This card will be stored in a separate capture card box or over a card slid under the device. The card thickness is easy adjustable between 0,76 - 1,00 mm, Further options are a bezel or a shutter (protection against dust or vandalism). Available with the interfaces RS-232 or RS-422. CHR-1000 card dispenser with encoder and push-type mechanism for up to 500 cards. This dispener can read magnetic cards and read + encoder chip cards. With push-type mechanism for difficult to separate cards (no card jam). High card dispensing between 2, - 4 sec. per card. Card capture funciton to return cards (e.g. defective) in a separate box. Card thickness easy to adjust between 0,2 - 1,0 mm, Optional with bezel or shuttter (protection against vandalism). Available with the interfaces RS-232 or RS-422. Description Note Model/Typ CHR-1000 card dispenser with encoder Card magazine Stacker Card transportation push-type mechanism Card thickness 0,76 - 1,0 mm  Card size ISO 7810 /  85,725 x 53,975 mm  Magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Magnetic card reader 1-3 tracks read only HiCo+LoCo reading Magnetic head Min. 1 Mio. reading operations Chip card reader 8 contacts chipstation reading + encoding Card empty sensor Yes card magazine Low card warning sensor at 25, 50, 75 cards adjustable Card capture function Yes Capture card box Yes returned cards Bezel Optional  Shutter Optional  Dimensions 100 cards 167 x 360 x 172 mm 200 cards 167 x 360 x 248 mm 300 cards 167 x 360 x 324 mm 500 cards 167 x 360 x 476 mm Bezel+ 13,5 mm Shutter + 26,7 mm  Power consuption DC 24V "

CIM-1000 Card dispenser with encoder for magnetic, chip and RFID cards. CIM-1000 card dispenser The CIM-1000 card dispenser with card reader and encoder for magentic, chip and RFID cards (contactless). This series is a modular encoding system which can be combined arbitrary. The stacker type card magazine has a capacity of up to 500 cards (0,76 mm). And the card thickness can be adjusted between 0,2 - 1,0 mm by the enduser itself. Our unique clutch system ensures the single output of every card and prevents card jam in the device. The dispsener allows and intelligent monitoring of all card prcesses. It controles the card position and also gives low card or card empty warning. Futher cards can be returned into the device with the card capture function, in case they are defective or were not collected by the customer. The CIM-1000 can be combined with a thermal re-write printer. Feel free to request for more detailed information. The CIM-1000 card dispsenr with encoder for magnetic, chip and RFID-cards. High speed card processing, only 2,3 - 4 sec. per card. The unique clutch system secures the single card output (no card jam). Card thickness can be adjusted between 0,2 - 1,0 mm. Intelliegent monitoring of all card processes with own micro processor. With low card and card empty warning sensors. Card capture function for return of cards (defective or not collected) Solid and robust structure for long-life with low-maintenance. Available with interface RS-232. The dispenser can be combined with a thermal ReWrite printer. Description Note Model/Typ CIM-1000 Card dispenser Card magazine Stacker  Card transportation Rollen  Card thickness 0,2-1,0 mm  Card size ISO 7810 85,725 x 53,975 mm  Card magazine capacity 200, 300, 500 cards  Magnetic cards reading + encoding 3 tracks, ISO 7811 Magnetic head 1.000.000 passes 1 pass= 1x forward and back Chip cards ISO 7816 RF-cards ISO 14443A- Mifare classic optional Mifare Desfire + UL Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Capture card box optional returned cards Shutter optional electronical Bezel optinal Furhter options Housing thermal printer Card drop Long life magnetic head 3 Mio. passes HiCo+LoCo magnetic head Dimensions 100 cards 131 + 453 x 161 mm 200 cards 131 x 453 x 247 mm 300 cards 131 x 453 x 327 mm 500 cards 131 x 453 x 477 mm Bezel + 13 mm Shutter + 30,2 mm länge  Power consumption DC 24V (+-5%) "

CIM-1800 Card dispenser with RFID encoder CIM-1800 Card dispenser The CIM-1800 Card dispenser with encoder for RFID cards (contactless chip cards ISO 14443). This dispenser has a stacker type card magazine for up to 500 cards capacity. The card thickness is adjustable from 0,2 - 1,0 mm very easily by the enduser itself. Out unique clutch system prevents card jam and ensures the single output of every card. The CIM-1800 allows the intelligent monitoring of all card processes like card position, low card and card empty warning. Futher cards which are defective or were not collected by the customer, can be returned into the device with the card capture function. Another option is the bezel or a shutter to prevent vandalism. Also a card drop function is available if the card should be dispensed into a take out port of a vending machine. This dispenser can be combined with a thermal rewrite printer. The CIM-1800 card dispenser with encoder for RF-cards (contacless chip cards ISO 14443). Card magazine capacity for up to 500 cards (0,76 mm). Fast card processing incl. read/write funciton 2,3-4 sec. per cards. With card capture function and capture card box. Intelligent monitoring of all card processes with own micro processor. Warning in case of low card, card empty, capture box full and also card position. The unique clutch system ensures the single output of every card (no card jam). Easy to adjust card thickness between 0,2 - 1,0 mm. Compact and robust design for long-life with low maintenance. Available with the interface RS-232. Description Note Model/Typ CIM-1800 Card dispenser with RFID encoder Card magazine Stacker  Card transportation Roller  Card thickness 0,22 - 1,0 mm  RFID card reader/encoder ISO 14443A Mifare Card size ISO 7810 Card magazine capacity 100, 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Auffangbox optional Shutter electr. optional Bezel optional Further options Higher frame for card capture box Thermal printer Card drop function Dimensions 100 cards 155 x 286 x 170 mm 200 cards  155 x 286 x 256 mm 300 cards  155 x 286 x 336 mm 500 cards  155 x 286 x 486 mm Bezel + 13 mm Shutter + 30,2 mm Power consumption DC 24V (+-5%) "

CIM-2000 Card dispenser with encoder and exchange cartridge CIM-2000 Card dispenser The CIM-2000 card dispenser with encoder for magnetic, chip and RFID cards (contacless cards) and exchange cartridge. A modular system for a flexible solutions, to exactly meet your requirement. The exchange cardridge for 200, 300 or 500 cards (0,76 mm). The card thickness can be adjusted between 0,2 - 1,0 mm very easy by the enduser. The unique clutch system ensures the single output of every card and prevents card jam in the dispenser. The CIM-2000 allows an intelligent monitoring of all card processes. It shows the card level in the magazine and gives a warning when low-card or the magazine is empty. Furhter cards which are e.g. defective can be returned with the card capture function. These cards are stored in an separate box. Also the options bezel or shutter are available to protect the dispenser against dirt or vandalism. For the card dispensing into a take out port of a vending machine, the card-drop function is the suitable option. This model is also available with a housing and can be combined with a thermal ReWrite printer. The CIM-2000 card dispenser with encoder for magnetic, chip and RFID cards. With exchange cartridge for 200, 300 or 500 cards allows quick and easy refilling. For magnetic card reading and encoding in HiCo/LoCo ISO 7810-13. For chip cards ISO 7816 reading and encoding. For RFID cards ISO 14443 reading and encoding. High speed card processing in reading, encoding and dispensing. With card capture function to return cards into the dispenser. With separate box for returned cards, capture card box. With special clutch system to prevent card jam. Card thickness is adjustable between 0,2 - 1,0 mm. Optional with bezel or shutter. With card drop function as option for vending machine solutions. Intelligent monitoring of all card processes with own memory. Available with RS-232 interface. Description Note Model/Typ CIM-2000 card dispenser with encoder Card magazine exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm Magnetic cards 3 track reading + encoding HiCo+LoCo magnetic head 2 Mio. passes 1 Pass = 1x forward +1x back  Chip cards reading + encoding ISO 7816  RFID cards lreading + encoding ISO 14443A Mifare  Card magazine capacity 200, 300, 500  cards  Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Card capture box Yes Card capture box sensor Yes Bezel optional Shutter optional  Further Options Housing Thermal ReWrite printer Card-Drop Funktion Longlife magnetic head 3 Mio. passes HiCo+LoCo magnetic card encoding "

CIM-2800 Card dispenser with RFID and exchange cartridge CIM-2800 Card dispenser The CIM-2800 card dispenser with encoder for RFID cards and exchange cartridge for up to 500 cards (0,76 mm). The device can process RFID cards ISO 14443. With exchange cartridge for easy and quick refilling of the dispenser. Card thickness is adjustable between 0,2 - 1,0 mm. With unique clutch system to ensure the single output of every card and prevent card jam in the card magazine. This device allows an intelligent monitoring of all card processes like card position, card level in the magazine and warning when magazine is empty. If a card is not taken by the customer or defective, the card capture function returns the card into the device in a separate box. The CIM-2800 can optionally be equiped with a bezel or a shutter against dust and vandalism. For card dispensing into a tako out port of a vending machine, the card-drop function is an available option. Furhter the dispenser has the option housing and can be cominbe with an thermal ReWrite printer. The CIM-2800 card dispenser with encoder for RFIC cards (contactless chip cards). With exchange cartridge for quick an easy refill with up to 500 cards. For high speed card processing. With unique clutch system to prevent card jam. Card can be returned into the dispenser with the card capture function. The card thickness is adjustable betwee 0,2 - 1,0 mm. With own memory for monitoring of  all card processes. Available with RS-232 interface. Description Note Model/Typ CIM-2800 card dispenser RFID Card magazine exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm RFID cards reading + encoding ISO 144443A Mifare Card magazine capacity 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Card capture box Yes (30 cards) for returned cards Card level sensor capture box Yes  Further Options Housing Thermal ReWrite Drucker Card-Drop Funktion  Dimensions without capture card box 200 cards 179 x 315 x 302 mm 300 cards 179 x 315 x 378 mm 500 cards 179 x 315 x 531 mm with capture card box 200 cards 143 x 262 x 331 mm 300 cards 143 x 262 x 409 mm 500 cards 143 x 262 x 551 mm  Power consumption DC 24V (+-5%) "

CIM-3800 Card printer with RF encoder and exchange cartridge CIM-3800 Card printer The CIM-3800 card printer with RF encoder and exchange cartridge for up to 1.000 cards (0,4 mm). This model was designed for printing and encoding/reading of RFID cards with tickness between 0,35 mm - 0,40 mm. The exchange cartridge allows a quick and easy refilling of the device. The card dispenser can also take back cards, in case they are e.g. defective or not collected by the customer. This cards will then be sorted out and stored in a separate box. The integrated sensors gives warning in case of low card level or if the card magazine is empty. The CIM-3800 is available with the interface RS-232. The CIM-3800 card printer with encoder for RFID cards (contactless chip cards). Suitable for RFID card ISO norm 14443 Mifare or compatible. For card thickness between 0,35 mm - 0,40 mm. The direct thermal printer has a printing resolution of 200 dpi. Also suitable for paper cards. With card capture function for e.g. defective cards. Integrated sensors for low card level or cartridge empty. With maximum card capacity of 1.0000 cards. For high speed card dispensing. Available with the interface RS-232. Description Note Model/Typ CIM-3800 card printer Card magazine Exchange cartridge Card transportation Roller Card thickness 0,35 - 0,45 mm Card size ISO 7810 85,725 x 53,975 mm  RFID cards reading + encoding ISO 14443 Mifare contactless cards  Card magazine capacity  400, 600, 1.000 cards Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Capture card box optinal Printer Direct thermal printer 200 dpi printing resolution for coated cards Further options Higher frame for capture card box Dimensions Power consumption DC 24V (+-5%) "

CIM-5000 Card dispenser with encoder and 2 security exchange cartridges CIM-5000 Card dispenser The CIM-5000 Card dispenser with reader/encoder for magnetic, chip, RFID cards and 2 exchange security cartridges for up to 1.000 cards. This model was specially developed for value cards like prepaid or gift cards. The security cartridges has their own ID plus memory and can´t be opened manually (without breaking the card magazine). The refilling of the card magazine takes place over the CCM-5000 and the dispensing through the CIM-5000. Both cant be done manually. So a lossless transportation and storage of the value cards is ensured. The device allows an intelligent monitoring of all card processes through the build in sensors. They give a warning at low card level or when the magazines are empty. Furhter cards can be returned into the device and stored in a speparate box. The CIM-5000 card dispsenser with encoder for up to 1.000 cards. The dispenser can read/encode magnetic, chip and RFID cards. With 2 selectably controllable card magazines, allows dispensing of 2 card types. Card can be returned into the device and stored in a speparate box. With automatic baudrate change (9.600-19.200 bps) over interface. With low-card, card empty warning and capture card box full. The special clutch system ensures single card output, no card jam. Card thickness is adjustable between 0,76-1,0mm. Available with  RS-232. Description Note Model/Typ CIM-5000 card dispenser Card magazine Exchange cartridges  Security system Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 Spuren reading + encoding HiCo+LoCo, ISO 7810-13 Chip cards reading + encoding ISO 7816 RFIC cards reading + encoding ISO 14443A Mifare contactless chip cards Card magazine capacity 2 x 200, 2 x 300 , 2 x 4002 x  500, 2 x 750  cards Interface RS-232 Card empty sensor Yes Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes Capture card box Yes (30 Karten ) Sensor capture card box Yes  Further Options Card Drop Version Longlife magnetic head  3 Mio. passes Bezel or Shutter Housing Version "

CIM-6000 Card dispenser with encoder and 2 exchange cartridges CIM-6000 Card dispenser The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards) and two magazines for up to 1.000 cards. With two exchange cartridges for quick and easy card refilling of the dispenser. Further the magazines are cotrollable selectively and allows the dispensing of two different card types out of one device. The slide-door version was developed for lateral cartridge exchange (instead from obove). This makes an interation even in low vending machines possible. The dispenser has a high speed card processing of 2,3 - 5 sec/card. Furhter card can also be returned into the device with the card capture function, in case the card was e.g. nocht collected by the customer or defecitve. This card are stored in a separate box or over a slide in an external box under the dispenser. Another option is the combination with a thermal ReWrite printer. The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards). With two exchange cartridges for a quick and easy refilling of up to 1.000 cards. The magazines are cotrollable separately and allows two diffenrent card dispensing. The slide-door version for lateral cartridge exchange, for integration in low machines. High speed card processing within 2,3-5 sec./card. Card thickness is adjustable between 0,22 mm- 1,0 mm. Available with  RS-232 interface. Description Note Model/Typ CIM-6000 Card dispenser Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7810-13 reading + encoding HiCo+LoCo "

CIM-7000 card dispenser with encoder and 4 exchange cartridges CIM-7000 card dispenser The CIM-7000 card dispenser with encoder for magnetic, chip, RFID card and 4 magazines for up to 2.000 cards. Available as stacker version or with exchange cartridges (4 x 300 and 4 x 500 cards). The magazines are controllable selectivly and allows the dispensing of four different card types out of one device. The unique clutch system ensures the single output of every card and prevents card jam. The integrated sensors enables an intelligent monitoring of all card processes like low-card warning or card magazine empty. Another option is the card capture function, to return cards into the dispenser. This is for cards which are defective or were not taken by the customer. These card were stored in a separet box. Furhter the CIM-7000 can be combined with a thermal ReWrite printer. The CIM-7000 card dispenser with encoder and 4 magazines for up to 2.000 cards. For magnetic, chip and RFID card reading and/or encoding. Available as stacker or exchange cartridge version. The 4 magazines can dispense 4 different card types out of one device. With card capture function for card return if e.g. card is defective. The unique clutch system ensures the single output of every card (no card jam). Automatic caudrate change between 9.600-19.200 bps over RS-232 interface. Card thickness is adjustable between 0,2-1,0 mm. Intelligent monigoring of all card processes with own memory. Available with RS-232 or TTL interface. Description Note Model/Typ CIM-7000 Card dispenser Card magazine Stacker or exchange cartidge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards reding + encoding HiCo+LoCo ISO 7810-13 Chip cards reding + encoding ISO 7816 RFID cards reding + encoding ISO 14443A Card magazine capacity 4 x 100, 4 x 200 4 x 200, 4 x 300 4 x  500  cards Interface RS-232, TTL Card empty sensor Yes Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes  returned cards Capture card box Yes (30 cards )  returned cards Sensor capture card box Yes Card Drop Yes for take out port vending machine Shutter elektr. optional Bezel optional Further options Thermal ReWrite printer Dimensions with exchange cartidge magnetic + chip 4 x 200 cards 287 x 511 x 393 mm 4 x 300 cards 287 x 511 x 395 mm 4 x 500 cards 287 x 511 x 545 mm only RF-cards 4 x 200 cards 287 x 451 x 393 mm 4 x 300 cards 287 x 451 x 395 mm 4 x 500 cards 287 x 451 x 545 mm with Stacker magazine magnetic + chip 4 x 100 cards 287 x 509 x 214 mm 4 x 200 cards 287 x 509 x 290 mm only RFID 4 x 100 cards 287 x 448 x 214 mm 4 x 200 cards 287 x 448 x 290 mm"

CIP-1000 Card printer with encoder for magnetic, chip and RFID cards. CIP-1000 Card printer The CIP-1000 card printer with encoder for up to 500 cards. This card dispenser with printer offers many configuration options. The thermal Re-Write printer needs no consumables like color ribbons or toner, but only card with a thermal sensitve surface. This cards can be printed, the print erased and be re-printed again. This operation can be done up to 500 times. Optional this model is available with encoder and reader for magnetic, chip and RFID careds. This makes it suitable for many applications. Also the card transportation can either be done by rubber roller or with a push-type mechanism for difficult to separate cards (statically charged). Further options are a bezel or a shutter to protect the the device. This model is availble with the interfaces RS-232 or USB. The CIP-1000 card printer with encoder for up to 500 cards. The thermal Re-Write printer need no consumbales like ribbons or tone. For thermel re-write cards, with thermal sensitive surface (coated). Cards can be printed, erased and reprinted up to 500 times. Optional with encoder/reader for magnetic, chip and RFID cards. Optional with rubber roller or push-type mechanism. Cards can also be sorted out in case they are defective. Further options: bezel, shutter and HiCo/LoCo selector. Available with the interfaces RS-232 or USB. Description Note Model/Typ CIP-1000 card printer Card magazine Stacker Card transportation CIP-1000 =Roller CHP-1000 = Push-type Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7811 3 track reading + encoding  HiCo/LoCo HiCo or LoCo or switch  Chip cards ISO 7816 reading + encoding 8 contact  chip station  RFID cards ISO 14443 Mifare or compatibel reading + encoding Printer Thermo ReWrite Drucker 300 dpi, Zeichen character or graphic horizontal or vertical printing Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 or USB Card empty sensor Yes Low card warning sensor 20, 50, 75  cards Card capture function Yes e.g.defective cards Shutter optional Bezel optional Dimensions 100 cards 151 x 511 x 141 mm 200 cards 151 x 511 x 217 mm 300 cards 151 x 511 x 303 mm 500 cards 151 x 511 x 475 mm Bezel+ 18 mm Shutter + 31 mm  Power consumption DC 24V (+-5%) "

CIP-1800 card printer with RFID encoder CIP-1800 card printer The CIP-1800 card printer with RFID encoder for up to 500 cards. This dispenser with printer offers a lot of configuration options. The thermal re-write printer needs no consumables like color ribbons or toner, but ony thermal re-write cards. These cards have a thermal sensitive surface and can be printed, the print erased and re-printed up to 500 times. Optional available with a reader/encoder for RFID cards ISO 14443 (Mifare or compatible). Either with rubber roller or push-type mechanism for card transportation. In case a card should be defecitve, this model can also return this card and sort it out by dropping it under the dispenser (external box). Further options are a bezel or shutter to protect the printer against vandalism. This model is available with the interface RS-232 or USB. The CIP-1800 card printer with encoder for up to 500 cards. The thermal ReWrite printer needs no consumables like color ribbons. For thermal ReWrite cards with thermal sensitive surface. This cards can be printed, erased and re-printed up to 500 times Optinonal with encoder/reader for  RFID cards ISO 14443 Mifare or compatibel. Card transportation trough rubber roller or push-type mechanism. Cards can be returned and sorted out into a external bos. Further options are: bezel, shutter and HiCo/LoCo swich. Available with the interfaces RS-232 or USB. Description Note Model/Typ CIP-1800 card printer Card magazine Stacker Card transportation CIP-1800 =Roller CHP-1800 = push-type Card thickness 0,20 - 1,0 mm Card size ISO 7810 / 85,725 x 53,975 mm RFID cards ISO 14443 Mifare oder compatibel reading + encoding Printer Thermal ReWrite printer 300 dpi, characters or graphic horizontaler oder vertikaler Druck Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 0r USB Card empty sensor Yes Low card warning sensor 20, 50, 75 cards Card capture function Yes defective cards Shutter optional Bezel optional Dimensions 100 cards 151 x 511 x 141 mm 200 cards 151 x 511 x 217 mm 300 cards 151 x 511 x 303 mm 500 cards 151 x 511 x 475 mm Bezel + 18 mm Shutter + 31 mm Power consumption DC 24V (+-5%) "

CIP-6000 Card printer with RF encoder and 2 exchange cartridges CIP-6000 Card printer The CIP-6000 Card printer with RFID encoder and two exchange cartridges for up to 1.000 cards. This card dispenser with printer offers many configuration options. The two separately controllable cards magazines allows the dispensing of two different card types out of one device. The thermal ReWrite printer needs no consumables like color ribbons or toner, but only thermal ReWrite cards. This cards can be printed, the pint erased and re-printed up to 500 times. This model is also available with an RFID reader/encoder for ISo 14443 cards (Mifare or compatible). Either the card transportation is available in two versions, CIP-1800 with rubber roller or CHP-1800 with push-type mechanism. In case a card should be defective, the dispenser can sort it out and drop it under the dispenser into an external box. Further options are a bezel or a shutter as protection against vandalism. With RS-232 or USB interface. The CIP-600 card pritner with two exchange cartridges for up to 1.000 cards. RFID encoder/reader for ISO 14443 cards ( Mifare or compatibel). Separately controllable card magazines, for two card type dispensing. No consumables like color ribbons or toner for printing necessary For printing on thermal ReWrite cards (thermo sensitive coat). This cards ca be reused up to 500 times. Available with roller or push-type for card transportation. With card capture function for e.g. defective cards. Further options: bezel, shutter and HiCo/LoCo switch. With RS-232 interface. Description Note Model/Typ CIP-600 card printer Card magazine 2 exchange cartridges Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 / 85,725 x 53,975 mm RFID cards ISO 14443 Mifare or compatibel reading + encoding Printer Thermal ReWrite 300 dpi, characters or graphic horizontal or vertikal printing Card magazine capacity 2 x 300 = 287 x 396 x 360 mm 2 x 500 = 287 x 396 x 518 mm cards Interface RS-232 Card empty sensor Yes Low card warning sensor 20, 50, 75 cards Card capture function Yes Capture card box optional Shutter optional Bezel optional Dimensions    600 cards 151 x 511 x 303 mm 1.000 cards 151 x 511 x 475 mm Bezel + 18 mm Shutter + 31 mm Power consumption DC 24V (+-5%) "

CIS-1000 Card dispenser with encoder and collector CIS-1000 The CIS-1000 Card dispenser with collector and encoder for RFID cards ISO 14443. This encoding station was developed for high amount card encoding. This device can read and encode magnetic, chip and RFID cards. The cards are filled in the dispenser, then are processed in the encoder and after that transfered into the collector. Each card magazine has a capacity of 500 cards (0,76 mm). In case a card is defective, this card will be sorted out and put in a capture card box.  The integrated sensors gives warning if a magazine is full or empty. This encoding station is available with an RS-232 interface. CIS-1000 encoding station for magnetic, chip and RFID cards. With card dispenser and collector, each 500 card capacity. Defecitve cards can be sorted out with the card capture function. This cards are stored in a separate box. Integrated sensors monitors magazines full or empty. Available with the interface RS-232. Description Note Model/Type CIS-1000 Encoding station Card magazine Stacker Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  Magnetic cards ISO 7811 3 track reading + encoding LoCo optional HiCo Chip cards ISO 7816 8 contacts reading + encoding  RF-Karten ISO 14443A Mifare or comp. Card magazine capacity Card dispenser : 200, 300, 500 Card collector: 200, 300, 500  cards Interface RS-232 Card empty sensor Yes Card dispenser Magazine full sensor Yes Card collector Card capture function Yes Capture card box Yes (30 cards ) for defective cards Capture card box sensor Yes  Dinemsions Magnetic, Chip, RF 200 cards 154 x 652 x 283 mm 300 cards 154 x 652 x 359 mm 500 cards 154 x 652 x 503 mm only RFID 200 cards 154 x 625 x 296 mm 300 cards 154 x 625 x 372 mm 500 cards 154 x 625 x 516 mm  Power consumption DC 24V (+-5%) "