CIM-2800 Card dispenser with RFID and exchange cartridge

CIS-2000 Card dispenser with encoder and collector CIS-2000 The CIS-2000 card dispenser with encoder for magnetic, chip and RFID cards and card collector. This encoding station is suitable for high amount card processing. The two exchange cartridges enables a quick and easy filling/emptying of the device. With 500 cards capacity (0,76 mm) for high speed card processing. For card encoding, the cards are filled into the dispenser, transfered into the encoder, checked and forwarded into the collector. If a card is defective, it will be sorted out by the card capture function of the device. This card will be store in a separate box. The integrated sensors gives warning in case a card magazine is empty/full. Available with the interface RS-232. CIS-2000 card dispenser, encoder and card collector. This encoding station is suitable for magnetic, chip and RFID cars. Optionally also available with housing. With build in sensors for card level monitoring. With card capture function for defective cards. Separate box for sorted out cards (capture card box). Available with the interface RS-232 . Description Note Model/Type CIS-2000 Card encoding station Card magazine Exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7811 3 tracks reading + encoding LoCo optional HiCo Chip card ISO 7816, 8 Kontakte tracks reading + encoding RFID cards ISO 14443A Mifare oder komp. tracks reading + encoding Card magazine capacity Card dispenser: 200, 300, 500 Card collector: 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Dispenser Magazine full sensor Yes Collector Card capture function Yes Capture card box Yes (30 cards) defective cards Sensor capture card box Yes Dimensions 200 cards 168 x 625 x 339 mm 300 cards 168 x 625 x 415 mm 500 cards 168 x 625 x 568 mm Power consumption DC 24V (+-5%) "

CHR-1000 card dispenser with encoder for magnetic and chip cards and push-type CHR-1000 card dispenser The CHR-1000 card dispenser with encoder and push-type mechanism. This model can read magnetic cards and read and encode chip cards. The push-mechanism ensured the single output of every card. This mechanism is very suitable for difficult to separate cards (e.g. staticall charged). With high dispensing speed for fast card operations. If a card was not collected by the customer or is defective, the CHR-1000 can return the cards into the dispenser with the card capture function. This card will be stored in a separate capture card box or over a card slid under the device. The card thickness is easy adjustable between 0,76 - 1,00 mm, Further options are a bezel or a shutter (protection against dust or vandalism). Available with the interfaces RS-232 or RS-422. CHR-1000 card dispenser with encoder and push-type mechanism for up to 500 cards. This dispener can read magnetic cards and read + encoder chip cards. With push-type mechanism for difficult to separate cards (no card jam). High card dispensing between 2, - 4 sec. per card. Card capture funciton to return cards (e.g. defective) in a separate box. Card thickness easy to adjust between 0,2 - 1,0 mm, Optional with bezel or shuttter (protection against vandalism). Available with the interfaces RS-232 or RS-422. Description Note Model/Typ CHR-1000 card dispenser with encoder Card magazine Stacker Card transportation push-type mechanism Card thickness 0,76 - 1,0 mm  Card size ISO 7810 /  85,725 x 53,975 mm  Magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Magnetic card reader 1-3 tracks read only HiCo+LoCo reading Magnetic head Min. 1 Mio. reading operations Chip card reader 8 contacts chipstation reading + encoding Card empty sensor Yes card magazine Low card warning sensor at 25, 50, 75 cards adjustable Card capture function Yes Capture card box Yes returned cards Bezel Optional  Shutter Optional  Dimensions 100 cards 167 x 360 x 172 mm 200 cards 167 x 360 x 248 mm 300 cards 167 x 360 x 324 mm 500 cards 167 x 360 x 476 mm Bezel+ 13,5 mm Shutter + 26,7 mm  Power consuption DC 24V "

CIM-6000 Card dispenser with encoder and 2 exchange cartridges CIM-6000 Card dispenser The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards) and two magazines for up to 1.000 cards. With two exchange cartridges for quick and easy card refilling of the dispenser. Further the magazines are cotrollable selectively and allows the dispensing of two different card types out of one device. The slide-door version was developed for lateral cartridge exchange (instead from obove). This makes an interation even in low vending machines possible. The dispenser has a high speed card processing of 2,3 - 5 sec/card. Furhter card can also be returned into the device with the card capture function, in case the card was e.g. nocht collected by the customer or defecitve. This card are stored in a separate box or over a slide in an external box under the dispenser. Another option is the combination with a thermal ReWrite printer. The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards). With two exchange cartridges for a quick and easy refilling of up to 1.000 cards. The magazines are cotrollable separately and allows two diffenrent card dispensing. The slide-door version for lateral cartridge exchange, for integration in low machines. High speed card processing within 2,3-5 sec./card. Card thickness is adjustable between 0,22 mm- 1,0 mm. Available with  RS-232 interface. Description Note Model/Typ CIM-6000 Card dispenser Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7810-13 reading + encoding HiCo+LoCo "

CHM-1000 Card dispenser with encoder for magnetic, chip and RFID cards CHM-1000 Card dispenser The CHM-1000 Card dispenser with encoder for magnetic, chip and RFID cards (contacless cards). This model is available in two versions, with metal frame or with plastic frame. The plastic frame version is very suitable for contactless RFID card processing, as the trouble-free operation is ensured. This model is furhter equipped with a push-type mechanism for card transportation. Our pus-type models were disigned specially for cards, which are diffcult to separate because of their material (statically charged) or which are frequently used (canteens, car wash etc.). In case a card was not taken out of the dispenser by the customer, the CHM-1000 has a card capture function, to return the card into the device and stored in a capture card box. In addition we offer the options bezel or shutter (as protection against dust and vandalism). Also a housing version is available. The CHM-1000 can also be combined with a thermal ReWrite-pinter. This cards can be printed and reprinted up to 500 times, without using consumables like color ribbons or toner. Feel free to ask for more information if you are interested in this version. The CHM-1000 card dispenser with encoder for magnetic, chip and RFID cards. Available with metal or plastic frame feeder. The plastic version is suitable for DesFire/RFID cards for trouble-free operation. With push-mechanism for difficult to separate cards (statically charged). Easy to adjust card thickness between 0,76 - 1,0 mm. With card capture function and capture card box or card slide. Optional with bezel or shutter (against dust and vandalism) Also available with housing. Further option is the thermal ReWrite printer. Description Note Model/Typ  CHM-1000 card dispenser with encoder Card magazine Stacker Card transportation push-mechanism no rubber roller Thickness 0,76 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm Magnetic cards 3 track ISO reading + encoding LoCo or HiCo or autom. switch Magnetic head Standard 0,5 Mio passes Longlife magnetic head 3 Mio. passes (1 pass = 1x forward + 1x back) Chip cards ISO 7816 Chip cards contact station reading + encoding RFID cards (contacless) ISO 14443 Mifare or compatible reading + encoding Printer Opional Thermal ReWrite Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Yes card magazine Low card warning sensor optional for 500 card capacity magazine warning at: 25, 50, 75 cards  Card capture funciton Yes  Capture card box  optional for metal frame version for returned cards Card slide optional (insted of capture card box) for returned cards Bezel optional Shutter electr. optional Card Drop optional  Housing optional  Dimensions (LxWxH) with metal card feeding module: 100 cards 403 x 167 x 161 mm 200 cards 403 x 167 x 237 mm 300 cards 403 x 167 x 323 mm 500 cards 403 x 167 x 495 mm with plastic card feeding module: 100 cards 508 x 180 x 172 mm 200 cards 508 x 180 x 248 mm 300 cards 508 x 180 x 326 mm 500 cards 508 x 180 x 476 mm  Power consumption DC 24V "

CIM-5000 Card dispenser with encoder and 2 security exchange cartridges CIM-5000 Card dispenser The CIM-5000 Card dispenser with reader/encoder for magnetic, chip, RFID cards and 2 exchange security cartridges for up to 1.000 cards. This model was specially developed for value cards like prepaid or gift cards. The security cartridges has their own ID plus memory and can´t be opened manually (without breaking the card magazine). The refilling of the card magazine takes place over the CCM-5000 and the dispensing through the CIM-5000. Both cant be done manually. So a lossless transportation and storage of the value cards is ensured. The device allows an intelligent monitoring of all card processes through the build in sensors. They give a warning at low card level or when the magazines are empty. Furhter cards can be returned into the device and stored in a speparate box. The CIM-5000 card dispsenser with encoder for up to 1.000 cards. The dispenser can read/encode magnetic, chip and RFID cards. With 2 selectably controllable card magazines, allows dispensing of 2 card types. Card can be returned into the device and stored in a speparate box. With automatic baudrate change (9.600-19.200 bps) over interface. With low-card, card empty warning and capture card box full. The special clutch system ensures single card output, no card jam. Card thickness is adjustable between 0,76-1,0mm. Available with  RS-232. Description Note Model/Typ CIM-5000 card dispenser Card magazine Exchange cartridges  Security system Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 Spuren reading + encoding HiCo+LoCo, ISO 7810-13 Chip cards reading + encoding ISO 7816 RFIC cards reading + encoding ISO 14443A Mifare contactless chip cards Card magazine capacity 2 x 200, 2 x 300 , 2 x 4002 x  500, 2 x 750  cards Interface RS-232 Card empty sensor Yes Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes Capture card box Yes (30 Karten ) Sensor capture card box Yes  Further Options Card Drop Version Longlife magnetic head  3 Mio. passes Bezel or Shutter Housing Version "