Card printers

CIM-3800 Card printer with RF encoder and exchange cartridge CIM-3800 Card printer The CIM-3800 card printer with RF encoder and exchange cartridge for up to 1.000 cards (0,4 mm). This model was designed for printing and encoding/reading of RFID cards with tickness between 0,35 mm - 0,40 mm. The exchange cartridge allows a quick and easy refilling of the device. The card dispenser can also take back cards, in case they are e.g. defective or not collected by the customer. This cards will then be sorted out and stored in a separate box. The integrated sensors gives warning in case of low card level or if the card magazine is empty. The CIM-3800 is available with the interface RS-232. The CIM-3800 card printer with encoder for RFID cards (contactless chip cards). Suitable for RFID card ISO norm 14443 Mifare or compatible. For card thickness between 0,35 mm - 0,40 mm. The direct thermal printer has a printing resolution of 200 dpi. Also suitable for paper cards. With card capture function for e.g. defective cards. Integrated sensors for low card level or cartridge empty. With maximum card capacity of 1.0000 cards. For high speed card dispensing. Available with the interface RS-232. Description Note Model/Typ CIM-3800 card printer Card magazine Exchange cartridge Card transportation Roller Card thickness 0,35 - 0,45 mm Card size ISO 7810 85,725 x 53,975 mm  RFID cards reading + encoding ISO 14443 Mifare contactless cards  Card magazine capacity  400, 600, 1.000 cards Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Capture card box optinal Printer Direct thermal printer 200 dpi printing resolution for coated cards Further options Higher frame for capture card box Dimensions Power consumption DC 24V (+-5%) "

CIP-1000 Card printer with encoder for magnetic, chip and RFID cards. CIP-1000 Card printer The CIP-1000 card printer with encoder for up to 500 cards. This card dispenser with printer offers many configuration options. The thermal Re-Write printer needs no consumables like color ribbons or toner, but only card with a thermal sensitve surface. This cards can be printed, the print erased and be re-printed again. This operation can be done up to 500 times. Optional this model is available with encoder and reader for magnetic, chip and RFID careds. This makes it suitable for many applications. Also the card transportation can either be done by rubber roller or with a push-type mechanism for difficult to separate cards (statically charged). Further options are a bezel or a shutter to protect the the device. This model is availble with the interfaces RS-232 or USB. The CIP-1000 card printer with encoder for up to 500 cards. The thermal Re-Write printer need no consumbales like ribbons or tone. For thermel re-write cards, with thermal sensitive surface (coated). Cards can be printed, erased and reprinted up to 500 times. Optional with encoder/reader for magnetic, chip and RFID cards. Optional with rubber roller or push-type mechanism. Cards can also be sorted out in case they are defective. Further options: bezel, shutter and HiCo/LoCo selector. Available with the interfaces RS-232 or USB. Description Note Model/Typ CIP-1000 card printer Card magazine Stacker Card transportation CIP-1000 =Roller CHP-1000 = Push-type Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7811 3 track reading + encoding  HiCo/LoCo HiCo or LoCo or switch  Chip cards ISO 7816 reading + encoding 8 contact  chip station  RFID cards ISO 14443 Mifare or compatibel reading + encoding Printer Thermo ReWrite Drucker 300 dpi, Zeichen character or graphic horizontal or vertical printing Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 or USB Card empty sensor Yes Low card warning sensor 20, 50, 75  cards Card capture function Yes e.g.defective cards Shutter optional Bezel optional Dimensions 100 cards 151 x 511 x 141 mm 200 cards 151 x 511 x 217 mm 300 cards 151 x 511 x 303 mm 500 cards 151 x 511 x 475 mm Bezel+ 18 mm Shutter + 31 mm  Power consumption DC 24V (+-5%) "

CIP-1800 card printer with RFID encoder CIP-1800 card printer The CIP-1800 card printer with RFID encoder for up to 500 cards. This dispenser with printer offers a lot of configuration options. The thermal re-write printer needs no consumables like color ribbons or toner, but ony thermal re-write cards. These cards have a thermal sensitive surface and can be printed, the print erased and re-printed up to 500 times. Optional available with a reader/encoder for RFID cards ISO 14443 (Mifare or compatible). Either with rubber roller or push-type mechanism for card transportation. In case a card should be defecitve, this model can also return this card and sort it out by dropping it under the dispenser (external box). Further options are a bezel or shutter to protect the printer against vandalism. This model is available with the interface RS-232 or USB. The CIP-1800 card printer with encoder for up to 500 cards. The thermal ReWrite printer needs no consumables like color ribbons. For thermal ReWrite cards with thermal sensitive surface. This cards can be printed, erased and re-printed up to 500 times Optinonal with encoder/reader for  RFID cards ISO 14443 Mifare or compatibel. Card transportation trough rubber roller or push-type mechanism. Cards can be returned and sorted out into a external bos. Further options are: bezel, shutter and HiCo/LoCo swich. Available with the interfaces RS-232 or USB. Description Note Model/Typ CIP-1800 card printer Card magazine Stacker Card transportation CIP-1800 =Roller CHP-1800 = push-type Card thickness 0,20 - 1,0 mm Card size ISO 7810 / 85,725 x 53,975 mm RFID cards ISO 14443 Mifare oder compatibel reading + encoding Printer Thermal ReWrite printer 300 dpi, characters or graphic horizontaler oder vertikaler Druck Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 0r USB Card empty sensor Yes Low card warning sensor 20, 50, 75 cards Card capture function Yes defective cards Shutter optional Bezel optional Dimensions 100 cards 151 x 511 x 141 mm 200 cards 151 x 511 x 217 mm 300 cards 151 x 511 x 303 mm 500 cards 151 x 511 x 475 mm Bezel + 18 mm Shutter + 31 mm Power consumption DC 24V (+-5%) "

CIP-6000 Card printer with RF encoder and 2 exchange cartridges CIP-6000 Card printer The CIP-6000 Card printer with RFID encoder and two exchange cartridges for up to 1.000 cards. This card dispenser with printer offers many configuration options. The two separately controllable cards magazines allows the dispensing of two different card types out of one device. The thermal ReWrite printer needs no consumables like color ribbons or toner, but only thermal ReWrite cards. This cards can be printed, the pint erased and re-printed up to 500 times. This model is also available with an RFID reader/encoder for ISo 14443 cards (Mifare or compatible). Either the card transportation is available in two versions, CIP-1800 with rubber roller or CHP-1800 with push-type mechanism. In case a card should be defective, the dispenser can sort it out and drop it under the dispenser into an external box. Further options are a bezel or a shutter as protection against vandalism. With RS-232 or USB interface. The CIP-600 card pritner with two exchange cartridges for up to 1.000 cards. RFID encoder/reader for ISO 14443 cards ( Mifare or compatibel). Separately controllable card magazines, for two card type dispensing. No consumables like color ribbons or toner for printing necessary For printing on thermal ReWrite cards (thermo sensitive coat). This cards ca be reused up to 500 times. Available with roller or push-type for card transportation. With card capture function for e.g. defective cards. Further options: bezel, shutter and HiCo/LoCo switch. With RS-232 interface. Description Note Model/Typ CIP-600 card printer Card magazine 2 exchange cartridges Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 / 85,725 x 53,975 mm RFID cards ISO 14443 Mifare or compatibel reading + encoding Printer Thermal ReWrite 300 dpi, characters or graphic horizontal or vertikal printing Card magazine capacity 2 x 300 = 287 x 396 x 360 mm 2 x 500 = 287 x 396 x 518 mm cards Interface RS-232 Card empty sensor Yes Low card warning sensor 20, 50, 75 cards Card capture function Yes Capture card box optional Shutter optional Bezel optional Dimensions    600 cards 151 x 511 x 303 mm 1.000 cards 151 x 511 x 475 mm Bezel + 18 mm Shutter + 31 mm Power consumption DC 24V (+-5%) "

CSC-2800 card dispenser with RFID encoder and exchange security cartridge CSC-2800 card dispenser The CSC-2800 card dispenser with RFID encoder and exchange security cartridge for up to 500 cards (0,76 mm). This dispenser was developed for value cards e.g. prepaid cards which requires additional security features. The exchange cartridge has it´s own lock and is locked as a whole in the dispenser. So neither cards nor the cartridge can be removed. With build in RFID card reader/encoder (contacless chip cards). The integrated sensors gives warning by low-card level or empty cartridge. Available with the interfaces RS-232 or RS-422. The CSC-2800 card dispenser with RFID encoder and security cartridge. The security exhange cardridge with lock for up to 500 cards (0,76 mm). With RFID reader / encoder  (ISO 14443). With card capture function for e.g. defective cards. With low-card and cartridge empty waring sensors. Optional with bezel or shutter against vandalism. Available with the interfaces RS-232 oder RS-422. Description Note Model/Typ CSC-2800 card dispenser Card magazine Security exchange cartridge Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm RFID cards ISO 14443 Mifare reading + encoding or compatible Card magazine capacity 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Card capture funciton Yes Capture card box Yes (30 cards) Sensor capture card box Yes Shutter electr. optional Bezel optional Dimensions 200 cards 321 x 180 x 362 mm 300 cards 321 x 180 x 462 mm 500 cards 321 x 180 x 562 mm Power consumption 24V, 3,0 A "

KYP-1000 Printer module with RFID encoder KYP-1000 Printer module The KYP-1000 printer module with RFID encoder for thermal ReWrite cards. This printer allows to print cards, erase the print and re-print them again up to 500 times. Therefore no consumables like color ribbons or tone are necessary but only thermal ReWrite cards. Optional this model is available with a RFID encoder fro ISO 14443 cards. In case a card is defecitve it can be sorted it out and droped under the device (external box). Available with the interfaces RS-232 or USB. The KYP-1000 Printer module with RFID encoder. Suitable for PVC or PET cards with thermal ReWrite cover. Printer with 300 dpi high quality printing resolution (monochrome). For reading + encoding of ISO 144443 cards, Mifare or compatible. With error and card capture function for defective cards. Available with RS-232 or USB interface. Description Note Model/Typ KYP-1000 printer module Printer Thermal ReWrite 300 dpi resolution monochrome RFID cards ISO 14443 Mifare or kompatibel reading + encoding  optional Card type PVC or PET Thermal ReWrite coated  e.g. Mitsubishi TRGS33T2A Card size ISO 7810 85,725 x 53,975 mm Card magazine capacity 2 x 200, 2 x 300 2 x 400, 2 x  500 cards Interface RS-232 Card capture function optional Rear output optional Bezel optional Dimensions closed Module 123 x 177 x 144 mm open Module 123 x 177 x 260 mm Power consuption 24V DC, Standby "

KYP-5000 Card printer with encoder and 2 magazines KYP-5000 Card printer The KYP-5000 Card printer with encoder and two card magazines for up to 1.000 cards. The thermal ReWrite printer can print, erase and re-print cards up to 500 times. Therefore no consumables like color ribbons or toner are necessary, but only thermal ReWrite cards. Optionla the printer is available with an encoder for magnetic, chip and RFID cards. Other options are a bezel and the card drop function. The build in sensors allows a intelligent monitoring of the card processes. Available with the interfaces RS-232 or RS-422. The KYP-5000 card printer with encoder and 2 magazines for up to 1.000 cards. Thermal ReWrite printer with 300 dpi printing resolution. Optional with encoder for magnetic, chip and RFID cards. With sensors for card level and card empty magazine. Defecitve cards can be sorted out and droped in a external box. Optinal with bezel or shutter to protect against dirt or vandalism. Available with the interfaces RS-232 or RS-422. Description Note Model/Typ KYP-5000 card printer Card magazine type Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 track reading + encoding ISO 7811 HiCo oder LoCo or switch Chip cards reading + encoding ISO 7816 / 8 contace RFID cards reading + encoding ISO 14443 Mifare or compatible Printer Thermal ReWrite printer 300 dpi resolution monochrome Card magazine capacity 2 x 200, 2 x 3002 x 400, 2 x  500  cards Interface RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Low card warning sensor Card capture function Yes optional without box Capture card box Yes(30 cards ) for defective cards Card level sensor box Yes Further options Bezel or shutter Dimensions 2 x 200 cards mm2 x 300 cards 255 x 527 x 385 mm 2 x 400 cards mm 2 x 500 cards 255 x 527 x 528 mm Power conumption DC 24V (+-5%) "

KYP-6000 Card printer terminal with RFID KYP-6000 Card printer The KYP-6000 Card printer terminal for printing and encoding of RFID cards. This is our desktop solution for daily service card personalisation. Ideal for  membership, student or loyalty cards. This cards can be printed and encoded within seconds. The thermal re-write printer needs no concumables like toner or color ribbons but only thermal re-write cards. This cards can be printed, the print erased and re-printed up to 500 times. With 300 dpi resolution for high quality monochrome printing results. Optional available with an RFID encoder for ISO 14443 cards. With RS-232 or USB interface. The KYP-6000 Card printer terminal with RFID encoder. Thermal ReWrite printer needs no color ribbons or toner. For thermal re-write cards for up to 500 prints per cards. Optional with RFID encoder for ISO 14443 cards. Available with RS-232 or USB. Description Note Model/Typ KYP-Card printer terminal RFID cards ISO 14443 Mifare or compatible reading + encoding Card type PVC or PET Thermo ReWrite cards e.g. Mitsubishi TRGS33T2A Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Interface RS-232 or USB Dimensions 140 x 246 x 159 mm Power supply 24V, 5A, external power supply incl. Power consumption DC 24V (+-5%) "

TAM-1000 Ticketprinter for paper tickets with magnetic stripe TAM-1000 Ticketprinter The TAM-1000 Ticketprinter for paper tickets with magnetic stripe. This model was specially designed for parking, public transportation and toll applications. The printer has a resolution of 200 dpi for best printing results and is equipped with a magnetic encoder for all three magnetic tracks. With front-in and fron-out and either front-in and rear-out function. Further with card capture function to return error tickets. The long-life and solid stepper motor for high speed card transportation with 350 mm/sec and card printing 55 mS per line. Optional with Bezel or shutter and also housing is available. With clamshell body for and LCD display for easy operation and maintenance. The TAM-1000 ticketprinter for magnetic papertickets. For magnetic stripe reading and encoding in HiCo and/or LoCo. For thermal direct printing with 200 dpi resolution. High printing speed of 50 mm/sec and line. With clamshell body for easy maintenance. With error card capture function to return cards. Optional with bezel or shutter. Optional as housing version available. Available with the interfaces RS-232 or USB. Description Note Model/Typ TAM-1000 Ticketprinter Card type Papertickets with thermal sensitive coating &nbsp\"

TAM-3000 Ticket printer for RFID or barcode paper tickets TAM-3000 Ticket printer The TAM-3000 Ticket printer for RFID or barcode papertickets. This model is very suitable for applications like parking, toll station, public transportation or access controling. This model can read and enccode RFID cards or read barcodes 1D/2D. The printer is a thermal direct printer with 200 dpi resolution for best results. The robust and durable stepp motor has a high transport speed of 350 mm/sec. The printing speed is 55 mS per line with front-in/front-out or front-in/rear-out function. Further a card capture function is available as well as a bezel or shutter option. The TAM-3000 ticket printer for RFID or barcode paper tickets. RFID card reading + encoding and barcode 1D/2D reading. Thermal direct printing with 200 dpi printing resolution. Printing speed 50 mm/sec and line. With clamshell body for easy maintenance. With card capture function for e.g. defective cards. Optional with housing, bezle or shutter. Available with the interfaces RS-232 or USB. Description Note Model/Typ TAM-3000 Ticket printer Card type Paper tickets with RFID or barcode with thermal sensitive surface  RFID ISO 14443 Mifare or compatible reading + encoding  Barcode 1D and 2D reading Card size ISO 7810 85,725 x 53,975 mm Card thickness 0,22 mm Printer Thermal direct printer for cards with thermal sensitive coat Printing resolution 200 dpi Printing speed 50 mS/Zeile Lifetime printer head 50 km Bezel optional Shutter optional Card capture function Yes Interface RS-232 or USB Power consumption DC 24V (+-5%) "

TIM-1000 Ticket printer fanfold magnetic paper tickets TIM-1000 Ticket printer The TIM-1000 ticket printer for fanfold magnetic paper tickets. This model was designed to ticket applications like, toll collection, ticket vending machines, public transportation or parking management. The integrated card reader can read and encode magnetic cards with HiCo or LoCo. The card will be printed with thermal direct method with 200 dpi resolution for best printing results. The high operating speed of 340 mm/second allows to finish the process of printing and encoding within 1,8 seconds. The device encodes, checkes the encoding and print the card in one work step. In case a card should be defective, this model is able to sort this card out and drop it in a separate box. The clamshell design of this printer allows a quick and easy maintenance. Optional available with bezel or shutter. The TIM-1000 ticket printer for fanfold magnetic tickets. For reading and encoding magnetic cards HiCo and LoCo. With longlife magnetic head for 3 mio. passes. Card printing with thermal direct method with 200 dpi resolution. For single or dual ticket charge available. High speed card processing within 1,8 sec per card. With card capture function for e.g. defective cards. Optional with bezel or shutter. With RS-232 or USB interface. Description Note Model/Typ TIM-1000 Ticket printer Kartentyp Fanfold magnetic cards Leporello Card size ISO 7810 85,725 x 53,975 mm Card thickness  0,18 - 0,22 mm Magnetic cards ISO 7811 HiCo/LoCo 3 Spuren reading + encoding Magnetic head Longlife 3 Mio. passes reading + encoding Printer Thermal direct printer 200 dpi resolution Printing head 50 km (lifetime) Cutter 60 mm cutting edge (500.000 cards) Printing speed 50 mS/line Card capture function Yes Bezel optional Shutter  optional Interface RS-232 oder USB Power consumption DC 24V (+-5%) "

TIM-2000 Ticket printer for magnetic fanfold/paper roll tickets TIM-2000 Ticket printer The TIM-2000 ticket printer for magnetic fanfold paper tickets or ticket roll. Suitable for versatile applications like parking, toll collection, public transportation and many more. The printing method is thermal direct with 200 dpi resoltuion for best results. With magnetic card encoder allows encoding, checking of encoding and printing in one work step. With a high transportation speed of 340 mm/second the whole card process is done within 1,8 seconds. Defective cards can be sorted out with the card capture function and droped in a separate box. The clamshell desing allows a quick and easy maintenance of the device. Available with RS-232 or USB interface. Der TIM-2000 Ticketdrucker für Magnetkarten (Papiertickets) Leporello oder Rolle. Das Gerät kodiert, prüft und bedruckt die Tickets in einem Durchgang. Mit hoher Arbeitsgeschwindigkeit von 340 mm/Sek. Die Ticketausgabe erfolgt so innerhalb von nur 1,8 Sekunden. Außerdem können z.B. fehlerhaft Karten vom Gerät eingezogen werden. Die eingezogenen Karten werden in einer Auffangbox gesammelt. Der Thermo Direktdrucker hat ein Auflösung von 72 dpi. Verfügbar sind die Schnittstellen RS-232 oder USB. Description Note Model/Typ TIM-2000 Ticket printer Magnetic cards reading + encoding, 3 tracks ISO 7811 HiCo or LoCo encoding Fanfold or roll  Leporello Printer Thermal direct printer 72 dpi resolution Printer head Lifetime: 200 Mio. Dots Cutter 64 mm rotary type cutter Lifetime: 1 Mio. cards Card thickness 0,18 -0,22 mm, paper cards Card size ISO 7810 85,725 x 53,975 mm Interface RS-232 or USB Card capture funciton Yes Bezel optional Dimensions W:138 x L: 454 x  H:138 mm  Stromverbrauch DC 24V, 4A "

TIM-3000 Ticket printer RFID or barcode fanfold TIM-3000 Ticket printer The TIM-3000 Ticket printer for RFID or barcode 1D/2D fanfold tickets. This model was designed for applications like parking, public transportation or toll collection. The device can read and encode RFID cards and read all common barcodes 1D/2D. The pinting method is thermal direct with 200 dpi resolution for best results. With high speed card processing of 300 mm/second. This model prints, encodes and checkes the encoding in one work step. If a card should be defective, it will be sorted out with the card capture function and droped in a separate box. The solid and industrial clamshell design secures long-life with low maintenance. Available with the interfaces RS-232 or USB. The TIM-3000 ticke printer with barcode reader and RFID encoder. For pinting and encoding of fanfold paper tickets. For single or dual ticket charging. Print with 200 dpi resolution for best results. Tearing/gullotine type cutter with endless life time. Available with the interfaces RS-232 or USB. Description Note Model/Typ TIM-3000 Ticket printer Card type Leporello (fanfold tickets) Card size ISO 7810 85,725 x 53,975 mm Card thickness 0,18 - 0,22 mm RFID cards ISO 14443 Mifare or comp. reading + encoding Barcode reader 1D/2D Printer Thermal direkt 200 dpi resolution Printer head 50 km (life time) Cutter endless life time Printing speed 50 mS/line Card capture function Yes Bezel optional Shutter optional Interface RS-232 or USB Power consumption DC 24V (+-5%) "