Card dispensers

BIM-7000 Card dispenser with barcode reader and 4 exchange cartridges BIM-7000 Card dispenser The BIM-7000 card dispenser with barcode reader and 4 exchange cartridges for up to 2.000 cards. With the integrated CCD 1D/2D barcode reader this dispesner can process all common barcodes. The build in sensors gives low card and cartridge empty warning. Optinal available with bezel or shutter to prevent vandalism. Further the device has an card capture function. In case a card should be defective or not collected, the card will be returned into the device. This cards are stored in a separate box or over a card slide under the machine. The following barcodes can be processed:QR-Code, Alle UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirektional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIM-7000 card dispsner with barcode reader for up to 2.000 cards. With 4 exchange cartridges for a quick and easy refilling of the dispenser. Equipted with CCD 1D/2D barcode reader for all common barcodes. Optional with bezel or shutter to protect the dispenser from vandalism. With card capture function and card bin. Available with the interface RS-232. Description Note Model/Typ BIM-7000 card dispenser with barcode reader Card magazine 4 exchange cartridges Card reader 1D/2D Barcode reader Card transportation Roller Card type ISO 7810 85,725 x 53,975 mm 0,2 - 1,0 mm card thickness Low card warning sensor Yes Card empty sensor Yes Interface RS-232 Card capture function Yes Card capture box optional Card slide optional Shutter optional Bezel optional Dimensions 200 cards (4x) 286,6 x 450,5 x 293 mm 300 cards (4x) 286,6 x 450,5 x 395 mm 500 cards (4x) 286,6 x 450,5 x 545 mm Bezel + 17,4 mm Shutter + 30,2 mm Power consumption DC 24V, 1,5 A "

BIS-1000 Card dispenser with encoder and barcode reader BIS-1000 Card dispenser The BIS-1000 Card dispenser and collector with card reader/encoder for magnetic, chip, RFID cards and barcode reader. This encoding system has a card dispenser for up to 500 cards, an encoding station and a card collector for up to 500 cards. In case a card should be defective the system is able to sort this card out. This card will be separated over a card switch and stored under the system in a external box. Available with the interface RS-232. The following barcodes can be processed: QR-Code, All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIS-1000 card dispenser with collector and encoder/reader. This model can process magnetic, chip, RFID and barcode cards. All common barcodes can be processed. With sorting function for defective cards. With build in sensors for low-card and magzine empty/full warning. Available with the interface RS-232. Description Note Model/Typ BIS-1000 Encoding station Card mgazine Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 track reading + encoding HiCo + LoCo, ISO 7810-13 Chip cards ISO 7816 reading + encoding RFID cards ISO 14443A Mifare or comp. reading + encoding Barcode reader 1D/2D reading Card magazine capacity 2 x 300 , 2 x 500 cards with side door for lateral refill Interfaces RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Sort out function Yes defective cards Box for sort out cards Yes Card slide optional Dimensions 200 cards 168,3 x 578,6 x 306 mm 300 cards 168,3 x 578,6 x 386 mm 500 cards 168,3 x 578,6 x 546 mm Power input AC 110V-AC 220V "

CDC-1000 Card dispenser with collector and RFID CDC-1000 The CDC-1000 card dispenser with collector and RFID card reader and encoder. This dispenser can also collect cards and lead them back in the card magazine, so they can be dispensed again. In case a card is defective, the system will sort it out and store it in a separate box. The optional card reader/encoder can process RFID cards ISO 14443. Further options are a bezel or a shutter (against dirst and vandalism). Available with the interfaces RS-232 or RS-422. The CDC-1000 card dispenser and collector for up to 100 cards. Optional with RFID reader/encoder for ISO 14443 cards. Further options are a bezel or a shutter (against dirt and vandalism). With sensors for low-card and magazine empty warning. Defecitve cards will be sorted out by the dispenser into a box. Available with the interfaces RS-232 or RS-422. Description Note Model/Type CDC-1000 card dispenser and collector Card magazine Stacker Card transportation Roller RFID cards reading + encoding ISO 14443 Mifare or compatible Card thickness 0,76 - 1,0 mm  Card size ISO 7810 85,725 x 53,975 mm Card magazine capacity 100 (0,76 mm) Interface RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes  defective cards Capture card box optional Bezel optional Shutter optional Dimensions 99 x 270 x 195 mm Bezel + 17,4 mm Shutter +44 mm  Power consumption DC 24V (+-5%) "

CHR-1000 card dispenser with encoder for magnetic and chip cards and push-type CHR-1000 card dispenser The CHR-1000 card dispenser with encoder and push-type mechanism. This model can read magnetic cards and read and encode chip cards. The push-mechanism ensured the single output of every card. This mechanism is very suitable for difficult to separate cards (e.g. staticall charged). With high dispensing speed for fast card operations. If a card was not collected by the customer or is defective, the CHR-1000 can return the cards into the dispenser with the card capture function. This card will be stored in a separate capture card box or over a card slid under the device. The card thickness is easy adjustable between 0,76 - 1,00 mm, Further options are a bezel or a shutter (protection against dust or vandalism). Available with the interfaces RS-232 or RS-422. CHR-1000 card dispenser with encoder and push-type mechanism for up to 500 cards. This dispener can read magnetic cards and read + encoder chip cards. With push-type mechanism for difficult to separate cards (no card jam). High card dispensing between 2, - 4 sec. per card. Card capture funciton to return cards (e.g. defective) in a separate box. Card thickness easy to adjust between 0,2 - 1,0 mm, Optional with bezel or shuttter (protection against vandalism). Available with the interfaces RS-232 or RS-422. Description Note Model/Typ CHR-1000 card dispenser with encoder Card magazine Stacker Card transportation push-type mechanism Card thickness 0,76 - 1,0 mm  Card size ISO 7810 /  85,725 x 53,975 mm  Magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Magnetic card reader 1-3 tracks read only HiCo+LoCo reading Magnetic head Min. 1 Mio. reading operations Chip card reader 8 contacts chipstation reading + encoding Card empty sensor Yes card magazine Low card warning sensor at 25, 50, 75 cards adjustable Card capture function Yes Capture card box Yes returned cards Bezel Optional  Shutter Optional  Dimensions 100 cards 167 x 360 x 172 mm 200 cards 167 x 360 x 248 mm 300 cards 167 x 360 x 324 mm 500 cards 167 x 360 x 476 mm Bezel+ 13,5 mm Shutter + 26,7 mm  Power consuption DC 24V "

CIM-1000 Card dispenser with encoder for magnetic, chip and RFID cards. CIM-1000 card dispenser The CIM-1000 card dispenser with card reader and encoder for magentic, chip and RFID cards (contactless). This series is a modular encoding system which can be combined arbitrary. The stacker type card magazine has a capacity of up to 500 cards (0,76 mm). And the card thickness can be adjusted between 0,2 - 1,0 mm by the enduser itself. Our unique clutch system ensures the single output of every card and prevents card jam in the device. The dispsener allows and intelligent monitoring of all card prcesses. It controles the card position and also gives low card or card empty warning. Futher cards can be returned into the device with the card capture function, in case they are defective or were not collected by the customer. The CIM-1000 can be combined with a thermal re-write printer. Feel free to request for more detailed information. The CIM-1000 card dispsenr with encoder for magnetic, chip and RFID-cards. High speed card processing, only 2,3 - 4 sec. per card. The unique clutch system secures the single card output (no card jam). Card thickness can be adjusted between 0,2 - 1,0 mm. Intelliegent monitoring of all card processes with own micro processor. With low card and card empty warning sensors. Card capture function for return of cards (defective or not collected) Solid and robust structure for long-life with low-maintenance. Available with interface RS-232. The dispenser can be combined with a thermal ReWrite printer. Description Note Model/Typ CIM-1000 Card dispenser Card magazine Stacker  Card transportation Rollen  Card thickness 0,2-1,0 mm  Card size ISO 7810 85,725 x 53,975 mm  Card magazine capacity 200, 300, 500 cards  Magnetic cards reading + encoding 3 tracks, ISO 7811 Magnetic head 1.000.000 passes 1 pass= 1x forward and back Chip cards ISO 7816 RF-cards ISO 14443A- Mifare classic optional Mifare Desfire + UL Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Capture card box optional returned cards Shutter optional electronical Bezel optinal Furhter options Housing thermal printer Card drop Long life magnetic head 3 Mio. passes HiCo+LoCo magnetic head Dimensions 100 cards 131 + 453 x 161 mm 200 cards 131 x 453 x 247 mm 300 cards 131 x 453 x 327 mm 500 cards 131 x 453 x 477 mm Bezel + 13 mm Shutter + 30,2 mm länge  Power consumption DC 24V (+-5%) "

CIM-2000 Card dispenser with encoder and exchange cartridge CIM-2000 Card dispenser The CIM-2000 card dispenser with encoder for magnetic, chip and RFID cards (contacless cards) and exchange cartridge. A modular system for a flexible solutions, to exactly meet your requirement. The exchange cardridge for 200, 300 or 500 cards (0,76 mm). The card thickness can be adjusted between 0,2 - 1,0 mm very easy by the enduser. The unique clutch system ensures the single output of every card and prevents card jam in the dispenser. The CIM-2000 allows an intelligent monitoring of all card processes. It shows the card level in the magazine and gives a warning when low-card or the magazine is empty. Furhter cards which are e.g. defective can be returned with the card capture function. These cards are stored in an separate box. Also the options bezel or shutter are available to protect the dispenser against dirt or vandalism. For the card dispensing into a take out port of a vending machine, the card-drop function is the suitable option. This model is also available with a housing and can be combined with a thermal ReWrite printer. The CIM-2000 card dispenser with encoder for magnetic, chip and RFID cards. With exchange cartridge for 200, 300 or 500 cards allows quick and easy refilling. For magnetic card reading and encoding in HiCo/LoCo ISO 7810-13. For chip cards ISO 7816 reading and encoding. For RFID cards ISO 14443 reading and encoding. High speed card processing in reading, encoding and dispensing. With card capture function to return cards into the dispenser. With separate box for returned cards, capture card box. With special clutch system to prevent card jam. Card thickness is adjustable between 0,2 - 1,0 mm. Optional with bezel or shutter. With card drop function as option for vending machine solutions. Intelligent monitoring of all card processes with own memory. Available with RS-232 interface. Description Note Model/Typ CIM-2000 card dispenser with encoder Card magazine exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm Magnetic cards 3 track reading + encoding HiCo+LoCo magnetic head 2 Mio. passes 1 Pass = 1x forward +1x back  Chip cards reading + encoding ISO 7816  RFID cards lreading + encoding ISO 14443A Mifare  Card magazine capacity 200, 300, 500  cards  Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Card capture box Yes Card capture box sensor Yes Bezel optional Shutter optional  Further Options Housing Thermal ReWrite printer Card-Drop Funktion Longlife magnetic head 3 Mio. passes HiCo+LoCo magnetic card encoding "

CIM-2800 Card dispenser with RFID and exchange cartridge CIM-2800 Card dispenser The CIM-2800 card dispenser with encoder for RFID cards and exchange cartridge for up to 500 cards (0,76 mm). The device can process RFID cards ISO 14443. With exchange cartridge for easy and quick refilling of the dispenser. Card thickness is adjustable between 0,2 - 1,0 mm. With unique clutch system to ensure the single output of every card and prevent card jam in the card magazine. This device allows an intelligent monitoring of all card processes like card position, card level in the magazine and warning when magazine is empty. If a card is not taken by the customer or defective, the card capture function returns the card into the device in a separate box. The CIM-2800 can optionally be equiped with a bezel or a shutter against dust and vandalism. For card dispensing into a tako out port of a vending machine, the card-drop function is an available option. Furhter the dispenser has the option housing and can be cominbe with an thermal ReWrite printer. The CIM-2800 card dispenser with encoder for RFIC cards (contactless chip cards). With exchange cartridge for quick an easy refill with up to 500 cards. For high speed card processing. With unique clutch system to prevent card jam. Card can be returned into the dispenser with the card capture function. The card thickness is adjustable betwee 0,2 - 1,0 mm. With own memory for monitoring of  all card processes. Available with RS-232 interface. Description Note Model/Typ CIM-2800 card dispenser RFID Card magazine exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm RFID cards reading + encoding ISO 144443A Mifare Card magazine capacity 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes Card capture box Yes (30 cards) for returned cards Card level sensor capture box Yes  Further Options Housing Thermal ReWrite Drucker Card-Drop Funktion  Dimensions without capture card box 200 cards 179 x 315 x 302 mm 300 cards 179 x 315 x 378 mm 500 cards 179 x 315 x 531 mm with capture card box 200 cards 143 x 262 x 331 mm 300 cards 143 x 262 x 409 mm 500 cards 143 x 262 x 551 mm  Power consumption DC 24V (+-5%) "

CIM-5000 Card dispenser with encoder and 2 security exchange cartridges CIM-5000 Card dispenser The CIM-5000 Card dispenser with reader/encoder for magnetic, chip, RFID cards and 2 exchange security cartridges for up to 1.000 cards. This model was specially developed for value cards like prepaid or gift cards. The security cartridges has their own ID plus memory and can´t be opened manually (without breaking the card magazine). The refilling of the card magazine takes place over the CCM-5000 and the dispensing through the CIM-5000. Both cant be done manually. So a lossless transportation and storage of the value cards is ensured. The device allows an intelligent monitoring of all card processes through the build in sensors. They give a warning at low card level or when the magazines are empty. Furhter cards can be returned into the device and stored in a speparate box. The CIM-5000 card dispsenser with encoder for up to 1.000 cards. The dispenser can read/encode magnetic, chip and RFID cards. With 2 selectably controllable card magazines, allows dispensing of 2 card types. Card can be returned into the device and stored in a speparate box. With automatic baudrate change (9.600-19.200 bps) over interface. With low-card, card empty warning and capture card box full. The special clutch system ensures single card output, no card jam. Card thickness is adjustable between 0,76-1,0mm. Available with  RS-232. Description Note Model/Typ CIM-5000 card dispenser Card magazine Exchange cartridges  Security system Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 Spuren reading + encoding HiCo+LoCo, ISO 7810-13 Chip cards reading + encoding ISO 7816 RFIC cards reading + encoding ISO 14443A Mifare contactless chip cards Card magazine capacity 2 x 200, 2 x 300 , 2 x 4002 x  500, 2 x 750  cards Interface RS-232 Card empty sensor Yes Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes Capture card box Yes (30 Karten ) Sensor capture card box Yes  Further Options Card Drop Version Longlife magnetic head  3 Mio. passes Bezel or Shutter Housing Version "

CIM-6000 Card dispenser with encoder and 2 exchange cartridges CIM-6000 Card dispenser The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards) and two magazines for up to 1.000 cards. With two exchange cartridges for quick and easy card refilling of the dispenser. Further the magazines are cotrollable selectively and allows the dispensing of two different card types out of one device. The slide-door version was developed for lateral cartridge exchange (instead from obove). This makes an interation even in low vending machines possible. The dispenser has a high speed card processing of 2,3 - 5 sec/card. Furhter card can also be returned into the device with the card capture function, in case the card was e.g. nocht collected by the customer or defecitve. This card are stored in a separate box or over a slide in an external box under the dispenser. Another option is the combination with a thermal ReWrite printer. The CIM-6000 Card dispenser with encoder for magnetic, chip and RFID cards (contactless chip cards). With two exchange cartridges for a quick and easy refilling of up to 1.000 cards. The magazines are cotrollable separately and allows two diffenrent card dispensing. The slide-door version for lateral cartridge exchange, for integration in low machines. High speed card processing within 2,3-5 sec./card. Card thickness is adjustable between 0,22 mm- 1,0 mm. Available with  RS-232 interface. Description Note Model/Typ CIM-6000 Card dispenser Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7810-13 reading + encoding HiCo+LoCo "

CIM-7000 card dispenser with encoder and 4 exchange cartridges CIM-7000 card dispenser The CIM-7000 card dispenser with encoder for magnetic, chip, RFID card and 4 magazines for up to 2.000 cards. Available as stacker version or with exchange cartridges (4 x 300 and 4 x 500 cards). The magazines are controllable selectivly and allows the dispensing of four different card types out of one device. The unique clutch system ensures the single output of every card and prevents card jam. The integrated sensors enables an intelligent monitoring of all card processes like low-card warning or card magazine empty. Another option is the card capture function, to return cards into the dispenser. This is for cards which are defective or were not taken by the customer. These card were stored in a separet box. Furhter the CIM-7000 can be combined with a thermal ReWrite printer. The CIM-7000 card dispenser with encoder and 4 magazines for up to 2.000 cards. For magnetic, chip and RFID card reading and/or encoding. Available as stacker or exchange cartridge version. The 4 magazines can dispense 4 different card types out of one device. With card capture function for card return if e.g. card is defective. The unique clutch system ensures the single output of every card (no card jam). Automatic caudrate change between 9.600-19.200 bps over RS-232 interface. Card thickness is adjustable between 0,2-1,0 mm. Intelligent monigoring of all card processes with own memory. Available with RS-232 or TTL interface. Description Note Model/Typ CIM-7000 Card dispenser Card magazine Stacker or exchange cartidge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards reding + encoding HiCo+LoCo ISO 7810-13 Chip cards reding + encoding ISO 7816 RFID cards reding + encoding ISO 14443A Card magazine capacity 4 x 100, 4 x 200 4 x 200, 4 x 300 4 x  500  cards Interface RS-232, TTL Card empty sensor Yes Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes  returned cards Capture card box Yes (30 cards )  returned cards Sensor capture card box Yes Card Drop Yes for take out port vending machine Shutter elektr. optional Bezel optional Further options Thermal ReWrite printer Dimensions with exchange cartidge magnetic + chip 4 x 200 cards 287 x 511 x 393 mm 4 x 300 cards 287 x 511 x 395 mm 4 x 500 cards 287 x 511 x 545 mm only RF-cards 4 x 200 cards 287 x 451 x 393 mm 4 x 300 cards 287 x 451 x 395 mm 4 x 500 cards 287 x 451 x 545 mm with Stacker magazine magnetic + chip 4 x 100 cards 287 x 509 x 214 mm 4 x 200 cards 287 x 509 x 290 mm only RFID 4 x 100 cards 287 x 448 x 214 mm 4 x 200 cards 287 x 448 x 290 mm"

CIS-1000 Card dispenser with encoder and collector CIS-1000 The CIS-1000 Card dispenser with collector and encoder for RFID cards ISO 14443. This encoding station was developed for high amount card encoding. This device can read and encode magnetic, chip and RFID cards. The cards are filled in the dispenser, then are processed in the encoder and after that transfered into the collector. Each card magazine has a capacity of 500 cards (0,76 mm). In case a card is defective, this card will be sorted out and put in a capture card box.  The integrated sensors gives warning if a magazine is full or empty. This encoding station is available with an RS-232 interface. CIS-1000 encoding station for magnetic, chip and RFID cards. With card dispenser and collector, each 500 card capacity. Defecitve cards can be sorted out with the card capture function. This cards are stored in a separate box. Integrated sensors monitors magazines full or empty. Available with the interface RS-232. Description Note Model/Type CIS-1000 Encoding station Card magazine Stacker Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  Magnetic cards ISO 7811 3 track reading + encoding LoCo optional HiCo Chip cards ISO 7816 8 contacts reading + encoding  RF-Karten ISO 14443A Mifare or comp. Card magazine capacity Card dispenser : 200, 300, 500 Card collector: 200, 300, 500  cards Interface RS-232 Card empty sensor Yes Card dispenser Magazine full sensor Yes Card collector Card capture function Yes Capture card box Yes (30 cards ) for defective cards Capture card box sensor Yes  Dinemsions Magnetic, Chip, RF 200 cards 154 x 652 x 283 mm 300 cards 154 x 652 x 359 mm 500 cards 154 x 652 x 503 mm only RFID 200 cards 154 x 625 x 296 mm 300 cards 154 x 625 x 372 mm 500 cards 154 x 625 x 516 mm  Power consumption DC 24V (+-5%) "

CIS-2000 Card dispenser with encoder and collector CIS-2000 The CIS-2000 card dispenser with encoder for magnetic, chip and RFID cards and card collector. This encoding station is suitable for high amount card processing. The two exchange cartridges enables a quick and easy filling/emptying of the device. With 500 cards capacity (0,76 mm) for high speed card processing. For card encoding, the cards are filled into the dispenser, transfered into the encoder, checked and forwarded into the collector. If a card is defective, it will be sorted out by the card capture function of the device. This card will be store in a separate box. The integrated sensors gives warning in case a card magazine is empty/full. Available with the interface RS-232. CIS-2000 card dispenser, encoder and card collector. This encoding station is suitable for magnetic, chip and RFID cars. Optionally also available with housing. With build in sensors for card level monitoring. With card capture function for defective cards. Separate box for sorted out cards (capture card box). Available with the interface RS-232 . Description Note Model/Type CIS-2000 Card encoding station Card magazine Exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7811 3 tracks reading + encoding LoCo optional HiCo Chip card ISO 7816, 8 Kontakte tracks reading + encoding RFID cards ISO 14443A Mifare oder komp. tracks reading + encoding Card magazine capacity Card dispenser: 200, 300, 500 Card collector: 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Dispenser Magazine full sensor Yes Collector Card capture function Yes Capture card box Yes (30 cards) defective cards Sensor capture card box Yes Dimensions 200 cards 168 x 625 x 339 mm 300 cards 168 x 625 x 415 mm 500 cards 168 x 625 x 568 mm Power consumption DC 24V (+-5%) "

CIS-4000 Card dispenser, encoder and collector with 4 exchange cartridges CIS-4000 The CIS-4000 card dispenser, encoder and collector is an encoding station for high amounts of cards. Suitable for encoding of magnetic, chip and RFID cards. With 4 exchange cartridges for up to 1.000 cards (2 x 500 dispenser + 2 x 500 collector). This cartriges allows a quick and easy refilling/emptying of the device. The CIS-4000 is available as build-in version or in housing. In case a card shoulb be defective, the encoding station will sort it out and store it in a seprarte box (capture card box). The integrated sensors gives warning if a card magazine is empty (dispenser) or full (collector). Available with RS-232 interface. The CIS-4000 card dispenser with encoder and collector. For magnetic, chip and RFID card processing. For high amount card processing, up to 1.000 cards. With exchange cartridges for quick and easy filling/emptying. With build in sensors for card level monitoring in the cartridge. As build-in or housing version available. With card capture function to sort out defective cards. With separate box for defective cards. Available with the interface RS-232. Description Note Model/Type CIS-4000 Card encoding station Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 78113 Spuren reading + encoding LoCo optional HiCo Chip cards ISO 7816 8 Kontakte reading + encoding RFID cards ISO 14443A Mifare or comp. reading + encoding Card magazine capacity Dispenser:2x 200, 2 x 300, 2 x 500 Collector: 2x 200, 2 x 300, 2 x 500 cards Interface RS-232 Card empty sensor Yes Dispenser Magazine full sensor Yes Collector Card capture function Yes Capture card box Yes (30 cards) defective cards Card level sensor capture box Yes Dimensions Power consumption DC 24V (+-5%) "

CPS-Series Card printer with encoding station and multiple card magazines CPS-Series Card printer The CPS-Series Card printer with encoding station and up to 4 exchange card magazines for high volumes cards processing . This model can print and encode up to 720 cards per hour. It is available either with one or two cartridges for the dispenser as well as for the collector. The encoding station is suitable for magnetic, chip and RFID cards. Each cartridge can hold up to 500 cards. Equipped with a monochrome thermal dye sublimation printer with 300 dpi high quality printing resolution. The version CPS-4000 can even process two different card types, as the cartridges are separately controllable. In case a card is defective, the system is able to sort it out and store it an separate box. The build in sensors monitors the card level in the cartridges. Available with the interfaces RS-232 and USB. The CPS-Series card printer with encoding station. Card dispenser, encoder and collector in one device. With exchange cartridges for up to 2.000 cards. For magnetic, chip and RFID cards. With thermal dye sublimation printer with 300 dpi resolution. CPS-4000 can process two different card types in one device. Card can be sorted out in case they are e.g. defective. With build in sensors for card level in the magazines. Available with the interfaces RS-232 or USB. Description Note Model/Typ CPS-Series Card printer and encoding staion Card magazine Stacker or exchange cartridge Card transportation Roller Card thickness 0,5 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  PVC or PET  Magentic cards ISO 7811 reading + encoding HiCo/LoCo optional  Chip cards ISO 7816 reading + encoding 8 contakte chip station  RFID cards ISO 14443 reading + encoding Mifare or copmatible Printer Thermal dye sublimation monochrome 300 dpi horizontal or vertical thermal transfer ribbon 1 Roll=300 x 60mm for 300 cards "

KHT-2100 Card dispenser push type KHT-2100 Card dispenser push type The KHT-2100 Card dispenser push type for up to 500 cards. It has a special push type mechanism which ensures the single output of every card, even when the cards are sticking together. This can be caused by the card material (statically charged) or when cards are frequently used. The push mechanism prevents card jam and ensures a trouble-free operation. The dispenser has a roust, compact design for long-life with low-maintenance. The KHT-2100 card dispenser for up to 500 cards. With special push type mechanism to prevent card jam. Separates also difficult to dispense cards. Optional with low-card and card-empty sensor. Further option is the bezel. Available with RS-232, RS-422 and TTL interface. Description Note Model KHT-2100 Card dispenser Magazine type Stacker Card transport Push type mechanism Card thickness 0,76-1,0 mm Card size ISO 7810 (CR80) Magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422, TTL Card empty sensor Yes Low card warning sensor 20, 45, 75 cards Shutter - Bezel optional  Further options DC power jack  Dimensions 100 cards 121 x 144 x 171,5 mm 200 cards 121 x 144 x 247,5 mm 300 cards 121 x 144 x 323,5 mm 500 cards 121 x 144 x 475,5 mm  Power consumption DC 24V (+-5%) "

KHT-2200 Card dispenser push type and card capture KHT-2200 Card dispenser push type and card capture The KHT-2200 Card dispenser push type and card capture function for up to 500 cards. The special push type mechanism ensures the single output of every card, even when they stick together e.g. because they are statically charged or frequently used. So card jams are prevented for a trouble-free operation. The card caputre function brings cards back into the device if they are e.g. defective or the customer didn´t take it out. With the compact and robust design, the KHT-2200 is of high quality for long-life with low-mainenance. Futher the card thickness can be adjusted very easy from 0,2 - 1,0 mm by the end user itself. It is also possible to mount a card reader/writer onto the feeder of the dispenser. Available with the interface RS-232. The KHT-2200 Card dispenser for up to 500 cards. With speciall push type mechanism (matal finger dispenser). Optional with shutter or bezel. With card capture function. Card magazine capacity for up to 500 cards (0,76 mm). Available with RS-232 interface. Description Note Model/Type KHT-2200 card dispenser Magazine Stacker Card transport Push type mechanism Card thickness 0,2 - 1,0 mm Card size ISO 7810 (CR 80) Magzine capacity 100, 200, 300, 500 cards Interface RS-232, TTL Card empty sensor Yes Low card warning Yes Shutter elektc. Optional Bezel Optional  Further Optionen -  Dimensions 100 cards : 116,3 x 239,4 x 171,5 mm 200 cards : 116,3 x 239,4 x 247,5 mm 300 cards : 116,3 x 239,4 x 323,5 mm 500 cards : 116,3 x 239,4 x 475,5 mm  Power consumption DC 24V "

KHT-2300 Card dispenser push type with card capture prepared for RFID modules KHT-2300 Card dispenser The KHT-2300 card dispenser push type with card capture for RFID modules. This dispenser has a special push type mechanism to ensure the single output of every card, even if they stick toghether because they are charged statically or used frequently. Thus card jam is preventend for a trouble-free operation of the device. The card magazine is available as stacker or exchange cartrigde version for up to 500 cards (0,76mm). Further the dispenser has a card capture funciton, to take cards back into a separate box. This can happen if cards are defective or the customer forgot to take it out. The feeder of the KHT-2300 can be expanded with an external card reader module like RFID, barcode or a camera. And the card thickness can be adjusted very easy by the end user from 0,2 -1,0 mm. The rocust and compact design makes it a long-life device and with low-maintenance. Available with the interfaces RS-232 or RS-422. Der KHT-2300 Card dispenser push type. With card magazine as stacker version or exchange cartridge. Magazine capacity for up to 500 cards (0,76 mm). Trouble-free operation without card jam trough push mechanism. With card capture fuction for defective cards. The feeder module is prepared for external card reader modules like RFID. Optional with higher frame for captured cards. With card-empty sensor and optional low-card sensor. Available with RS-232 or RS-422 interface. Description Note Model/Type KHT-2300 card dispenser Magazine KHT-2300 = Stacker KHT-2300C = Exchange cartridge Card transport Push mechanism Card thickness 0,2 - 1,0 mm Card size ISO 7810 (CR 80) Magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Yes Low card warning Yes/ at 20, 45, 75 cards Shutter elektc. Optional Bezel Optional Further options Higher frame for captured cards Dimensions 100 cards 124,9  x 315 x 171,5 mm 200 cards 124,9  x 315 x 247,5 mm 300 cards 124,9  x 315 x 323,5 mm 500 cards 124,9  x 315 x 475,5 mm Bezel + 13mm Shutter+ 30,2 mm Power consumption DC 24V "

KHT-2500 Card dispenser push type with exchange cartridge KHT-2500 Card dispenser The KHT-2500 Card dispenser with push type mechanism and exchange cartridge for up to 500 cards. This dispenser has a special push type mechanism for card dispensing which ensures the single output of every card. This prevents card jams in the magazine for a trouble-free operation. Even card which stick toghether because of their material (statically charged) or which are frequently used (e.g. canteens or car wash stations) are no problem for the KHT-2500. Due to the exchange cartridge the device can be filled with cards quick and easy. Available with the interfaces RS-232, RS-422 or TTL. The KHT-2500 card dispenser with exchange cartridge for up to 500 cards. With special push type mechanism to ensure the single card output. Suitable for difficult to separate cards (statically charged or frequent use). With compact and robust design for long-life with low-maintenance. The exchange cartridge makes the refill with cards easy and quick. With integrated sensors for low-card and card-empty report. Optional with bezel. Available with the interfaces RS-232, RS-422 or TTL. Description Note  Model/Typ KHT-2500 Kartenspender Magazin Exchange cartridge  card transport Push type mechanism  Card thickness 0,76 - 1,0 mm  Card size ISO 7810 85 725 x 53,975 mm   CR80  Magazine capacity 200, 300, 500 cards  Interface RS-232, RS-422, TTL  Card empty sensor Yes  Low card warning sensor at 20, 45, 70 cards Dip-switch  Card capture function No  Shutter No  Bezel Optional  Further options -  Dimensions 200 cards 112,5 x 148 x 254 mm 300 cards 112,5 x 148 x 330 mm 500 cards 112,5 x 148 x 482 mm Bezel +13 mm  Power consumption DC 24V (+-5%) "

KHT-2600 Card dispenser push-type with two exchange cartridges KHT-2600 Card dispenser The KHT-2600 card dispenser with push type mechanism and two exchange cartridges for up to 1.000 cards. The card magazines can be controlles separately and so allows the dispensing of two different card types out of one device. The exchange cartridges allows a quick and easy refilling of the dispenser. With the robust and compact design, this device is suitalbe for integration in machines with low hight. The optional slide-door mechnism allows the lateral inclination of the cartridges for exchange. The KHT-2600 can furhter collect cards (card capture function) which are e.g. defective and return them into the dispenser, in a capture box or over a card slide under the device. The device allows an intelligent monitoring of all card processes like: low card warning, card empty warning as well as capture bin full. Further the baud rate changes automatically (9600 bps - 19.200 pbs). The push type mechanism was developed for card which are difficult to separeate, because of material (stattically charged) or which are frequently used (canteens etc.). This mechanism ensures the single output and prevents card jam in the dispenser. This model is availabel with RS-232 interface. The KHT-2600 card dispenser with push type mechnism an dual exchange cartridge. With card capacity for up to 1.000 cards (2x500). Very robust and compat design for installation even in machines with low hight. The two cartridges can be controlled separately which allows dispensing of two card types. Defective cards can be returend into the dispenser (card capture function). Captured cards are stored in a capture box or over a card slide under the device. The special push mechanism ensures the singel output of very card (no card jam). This version is very suitable for cards which stick together (statically charged). The optional slide-door version allows the lateral exchange of the cartridges. For intelligent monitoring of all card processes with sensors for: low card warning, card empty warning and capture box full. With automatical baud rate change (9600 bps - 19.200 pbs). Available with the interface RS-232 oder TTL. Description Note Model/Typ KHT-2600 Card dispenser Card magazine Exchange cartridge  Dual  Card transportation Push type mechanism  Card thickness 0,22 - 1,0 mm  adjustable  Card size ISO 7810 85,725 x 53,975 mm Magazine capacity 2 x 200, 2 x 300 2 x 400, 2 x  500  cards  Interface RS-232, TTL  Card empty sensor Yes  Low card warning sensor 20, 40, 60, 80, 100 cards  Card capture function Yes  Capture box Yes (30 cards) for defective cards  Capture box full sensor Ja Further options  Slide-Door for cartridge Card slide instead of capture box for lateral exchange for defective cards  Dimensions 2 x 200 cards 250 x 168 x 288 mm 2 x 300 cards 250 x 168 x 360 mm 2 x 400 cards 250 x 168 x 438 mm 2 x 500 cards 250 x 168 x 518 mm  Power consumption DC 24V (+-5%) "

KSC-2000 Card dispenser with 2 security exchange cartridges KSC-2000 Kartenspender The KSC-2000 card dispenser with security exchange cartridges for up to 1.000 cards. This dispenser was developed for value cards like e.g. prepaid cards. The two separate controllable cartridges enables the system to even dispense two different card types out of one device. Further the cartridges has their own memory, for ID and card level inside. The cartridge is secured with a lock and is additionally locked as a whole in the dispenser. So a lost of cards during storage and transportation is prevented. The integrated sensors reports a low card level and also if the cartridge is empty. This dispenser is available with the interface RS-232. The KSC-2000 card dispenser with two security exchange cartridges for up to 1.000 cards. The two security cartridges are separately controlable. Two card types can be dispensed out of one device. Each cartridge has a lock and is locked as a hole in the dispenser. No lost of cards while storage and transportation. With sensors for low card and card empty warning. Available with the interface RS-232. Description Note Model/Typ KSC-2000 card dispenser Card magazin 2 security exchange cartridges  Card transportation Roller  Card tickness 0,76, 0,84, 1,0 mm  Card size ISO 7810 85,725 x 53,975 mm Magazine capacity 2 x 300, 2 x  500  cards  Interface RS-232 Card empty sensor Yes  Low card warning sensor Yes  Power consumption DC 24V (+-5%) "

KYT-2000 Card dispenser with dual magazine KYT-2000 Card dispenser The KYT-2000 card dispenser with dual card magazine for up to 1.000 cards. This model has two card magazines which can be controlled selectively. Thus two different card types can be dispensed out of one device. The unique clutch system prevents card jam in general. The solid and robust stucture have made this model a proven product since many year in the parking sector and also for payment cards. Further cards can be collected (card capture function) if they are defective or were not taken out by the customer. The dispenser allwos an intelligent monitoring of all card processes like: low card level, card empty and error card bin (for captured cards) full. Also the baud rate changes automatically from 9600 pbs to 19.200 pbs. The KYT-2000 is available with the interfaces RS-232 or TTL. The KYT-2000 card dispenser with dual magazine capacity for up to 1.000 cards (0,76 mm) Two selectivly controllable magazines allows the dispensing of two card types. The unique clutch system prevents card jam in general. The card capture function returns cards (e.g. defective) into the device. Captured cards are restored in the capture box. Low card level or empty magazine are singnaled by the dispenser. Also if the capture box is full the device will report it. With automatic baud rate change 9600 bps - 19200 bps. With robust and solid structure for long life with low-maintenance. Available with the interfaces RS-232 und TTL. Description Note  Model/Typ KYT-2000 card dispenser dual magazine  Card magazine Stacker  Card transportation Roller  Card tickness  0,2 - 1,0 mm  Card size ISO 7810 / 85,725 x 53,975 mm Magazine capacity 400 (2x200), 600 (2x300) 1000(2x500) cards  Interface RS-232, TTL Low card warning sensor Yes Card empty sensor Yes Card capture function Yes Capture box Yes defective cards Card level sensor capture box Yes Card slide insted of capture box optinal  Dimesnions 2 x 200 cards 234 x 163 x 302 mm 2 x 300 cards 234 x 163 x 377 mm 2 x 500 cards 234 x 163 x 542 mm  Power consumption DC 24V (+-5%) "

KYT-2100 Card dispenser single tray KYT-2100 Card dispenser The KYT-2100 card dispenser is very compact, of high qualtity and with low-maintenance. The card trasportation happens with material friendly rubber rollers, so the card surface can´t be damaged. The unique clutch system ensures the single output of the card and prevents card jam. The card dispenser can process cards with thickness between 0,2 mm - 1,0 mm. And the gap adjusting can be made by the user itself very easily. Further options are a shutter to protect the device against dust and also vandalism, a low card warning sensor to show low capacity in the magazine, and a card slide for integration in e.g. vending machines. The dispenser is available with TTL, RS-232 or RS-422 interface. The KYT-2100 card dispenser series is compact and with robust structure. Therefore  with high reliability and low-maintenance. The card transportation with rubber rollers prevents scratches on the card. The unique clutch system prevents card jam and ensures the single output. Card thickness between 0,2 mm - 1,0 mm can be dispensed. Optinal with shutter to protect the device from dust and vandalism. Further option is the low card warning sensor for 20, 45 or 75 cards. Available with the interfaces TTL, RS-232 or RS-422. Description Note Model KYT-2100 card dispenser  Card magazine Stacker Card transportation Roller (rubber) Interface TTL, RS-232, RS-422 Card capacity 48, 100, 200, 300, 500 cards 0,76 mm cards Card thickness 0,2 mm - 1,0 mm Card size ISO 7810 Standard card type  Card empty sensor Yes Shutter mech. optional Bezel optional Further options card slide for vending machines "

KYT-2500 Card dispenser with cartridge KYT-2500 Card dispenser The KYT-2500 Card dispenser with cartridge is very compact with robust industrial sturcture. This makes it high reliable and with low-maintenance. The card transportation happens with rubber rollers, which is material friendly and prevents scratches on the card surface. The unique clutch system prevents card jam and ensures the singel output of every card. Card with thickness between 0,2 mm -1,0 mm can be processed. And the gap adjusting can be made very easily by the user itself. The functional exchange cartridge allows a quick refill of the card dispenser. Further options are a shutter to protect the device from dust and vandalism or a bezel. The dispenser is available with the interfaces TTL, RS-232 or RS-422. The KYT-2500 with exchange cartridge for quick refill of the device. The device is very compact and high reliable with low-maintenance. With a unique clutch system to ensure the singel output of the cards. Optional with shutter to protect the dispesner against dust and vandalism. Or with a bezel as an insertion aid. Available with the interfaces TTL, RS-232 or RS-422. Description Note  Model KYT-2500 card dispenser  Magazin cartridge (exchange) Card transportation Roller (rubber) Interface TTL, RS-232 Magazine capacity 200, 300, 500 cards 0,76 mm cards Card thickness 0,2 mm - 1,0 mm Card size ISO 7810 Standard card type  Card empty sensor Yes Shutter mech. optional Bezel optional  Further options  12V Version  Dimensions 200 cards 300 cards 96 x 156 x 356,5 mm 500 cards 96 x 156 x 508,5 mm Bezel+ 13mm  Power supply DC 24V (+-5%) "

KYT-4600S Card dispenser with 4 card magazines KYT-4600S Card dispenser The KYT-4600S Card dispenser with 4 magazines for up to 2.000 cards. The card magazines can be controlled separately so it is possible to dispense 4 different card types out of one device. If the dispenser is filled with only one card type, the device automatically access to the next magazine if one is empty. Also if there should be failure. In case there are different card types, the magazines can be controlled separately. Further the KYT-4600S has a card capture function for e.g. defective cards. This cards will be returned into the card capture box. All card processes can be monitored, like low card warning, card empty warning and also if the card capture box is full. The baud rate changes automatically (9600 bps - 19.200 pbs). The KYT-4600S card dispenser with 4 magazines for up to 2.000 cards (4x500). Each card magazine can be controlled separately. This allows the dispensing of 4 different card types out of one device. With card capture function for card return if they are e.g. defective. Captured cards are stored in a capture box or over card slide under the dispenser. The unique clutch system ensures the singel output of ervery card (no card jam). With sensors for intelligent monitoring of all card processes: Low card warning, card empty warning, capture card box full. Automatical baud rate change (9600 bps - 19.200 pbs). Available with the interface RS-232. Description Note Model/Typ KYT-4600S Card dispenser Card magazine Stacker 4x Card transportation Roller  Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  Magzine capacity 4 x 100, 4 x 200 4 x 3004 x 400, 4 x  500  cards  Interface RS-232 Card empty sensor Yes  Low card warning sensor 20, 40, 60 Karten  Card capture function Yes  Card capture box Yes (30 cards) Capture box full Yes Further Options Card slide insted of capture box  Dimensions 4 x 300 Karten2 87 x 318 x 288 mm 4 x 400 Karten 287 x 318 x 395 mm 4 x 500 Karten 287 x 318 x 545 mm Power consumption DC 24V (+-5%) "