Card collectors

BIS-1000 Card dispenser with encoder and barcode reader BIS-1000 Card dispenser The BIS-1000 Card dispenser and collector with card reader/encoder for magnetic, chip, RFID cards and barcode reader. This encoding system has a card dispenser for up to 500 cards, an encoding station and a card collector for up to 500 cards. In case a card should be defective the system is able to sort this card out. This card will be separated over a card switch and stored under the system in a external box. Available with the interface RS-232. The following barcodes can be processed: QR-Code, All UPC/EAN/JAN, EAN128, Code 39, Code 39 Full ASCII, Code 32/Italian Pharmacy, Code 128, CODABAR/NW7, Interleave 25, Industrial 25, Matrix 25,  MSI/PLESSEY, Telepen, Code 9, Code 113, China Postage, Code 26, Code 25, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, QR Code. The BIS-1000 card dispenser with collector and encoder/reader. This model can process magnetic, chip, RFID and barcode cards. All common barcodes can be processed. With sorting function for defective cards. With build in sensors for low-card and magzine empty/full warning. Available with the interface RS-232. Description Note Model/Typ BIS-1000 Encoding station Card mgazine Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 track reading + encoding HiCo + LoCo, ISO 7810-13 Chip cards ISO 7816 reading + encoding RFID cards ISO 14443A Mifare or comp. reading + encoding Barcode reader 1D/2D reading Card magazine capacity 2 x 300 , 2 x 500 cards with side door for lateral refill Interfaces RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Sort out function Yes defective cards Box for sort out cards Yes Card slide optional Dimensions 200 cards 168,3 x 578,6 x 306 mm 300 cards 168,3 x 578,6 x 386 mm 500 cards 168,3 x 578,6 x 546 mm Power input AC 110V-AC 220V "

CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. CCM-1000 Card collector The CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. This model has a stacker type card magazine for up to 500 cards. It can be customized according to your requirements. With card capture function to sort out e.g. defective cards. This cards will be stored in a separate box or droped under the device into a external box. Another option is the card drop function, if a card should be returned e.g. in a take out port of a vending machine. The CCM-1000 has a high card processing speed of 2,3 - 4,0 sec./cards. Available with the interfaces RS-232 or RS-422. The CCM-1000 Card collector with encoder for magnetic, chip and RFID cards. The magnetic tracks can be processed simultane. Optional with HiCo/LoCo selector for magnetic cards. Card magazine capacity: 100, 200, 300 or 500 cards (76mm). With card capture function for e.g. defective cards. High speed card processing in 2,3-4 sec. per cards. Available with the interfaces RS-232 or RS-422. Description Note Model/Type CCM-1000 Card collector Card magazine Stacker Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card reading + encoding 3 track simultan HiCo+LoCo (selector optional)  Chip card reading + encoding ISO 7816  RFID card reading + encoding ISO 14443 Mifare  or comp. Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, RS-422 Card empty sensor Ja Low card warning sensor 20, 40, 60, 80, 100 cards Card capture function Yes  Auffangbox Yes Card-Drop Yes Shutter electr. optional Bezel optional  HiCo/LoCo Selector optional  Power consumption DC 24V, 3A "

CCM-2000 Card collector with encoder and exchange cartridge CCM-2000 Card collector The CCM-2000 Card collector with encoder for magnetic, chip and RFID cards and exchange cartridge for up to 500 cards. The exchange cartridge allows a quick and easy emptying of the device. This collector can be customized to exactly meet your requirements. It has a card capture function for e.g. defective cards. This cards will be sorted out and stored in a separate box or under the device in an external box. Another option is the card-drop function, to (return) a card into a take out port of a vending machine. The CCM-2000 has a high card processing speed of 2,3 -4,0 sec./card. Further this model is also available with a housing. Optional with RS-232, RS-422 or TTL interface. The CCM-2000 card collector with encoder and exchange cartridge for up to 500 cards. With card reader/encoder for magnetic, chip and RFID cards. Available with HiCo or LoCo or switch for magnetic cards. With exchange cartridge for quick and easy emptying of the collector. With card capture function and separate box to store them. With card-drop function for take out port of vending machines. Further options, electr. shutter or bezel, housing. Available with the interfaces RS-232, RS-422 or TTL. Description Note Model/Type CCM-2000 card  collector Card magazine Exchanage cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card reading + encoding 3 track simultan HiCo/LoCo or switch Chip card reading + encoding ISO 7816 / 8 contacts RFID card reading + encoding ISO 14443 Mifare or comp. Card magazine capacity 200, 300, 500 cards Interface RS-232, RS-422, TTL Magazine full sensor Yes Card capture function Yes Capture card box Yes Shutter electr. optional Bezel optional  HiCo/LoCo switch optional  Further options Housing version Dimensions Hybrid. Magnetic, Chip, RF 200 cards 143 x 343 x 341 mm 300 cards 143 x 343 x 417 mm 500 cards 143 x 343 x 569 mm Only RF-cards 200 Karten 143 x 303 x 341 mm 300 Karten 143 x 303 x 417 mm 500 Karten 143 x 303 x 569 mm Bezel + 17 mm Shutter + 44 mm  Power consumption DC 24 v, 3A "

CCM-4000 Card collector with encoder and 2 exchange cartridges CCM-4000 Card collector The CCM-4000 Card collector with reader/encoder for magnetic, chip and RFID cards. With 2 exchange cartridges for up to 1.000 cards (0,76 mm). This model can read all 3 magnetic tracks simultaneous and encode in HiCo and/or LoCo. The two exchange cartridges are controllable separately and allows the processing of two different card types. In case a card is e.g. defective or unvalid, this card can be sorted out by the device with the card capture function. This cards will be stored in a separate capture card box. Optional with bezel or shutter as protection against dirt and vandalism. The integrated sensors are monitoring the card level in the magazines and gives warning if one is full. The CCM-4000 card collector with 2 exchange cartridges. Card magazine capacity for up to 1.000 cards (2 x 500). With reader/encoder for magnetic, chip and RFID cards. Magnetic cards HiCo and/or LoCo simultaneous processing. Separately controllable magazines for two diffenrent card type processing. With card capture function and separate box. Optional with bezel or shutter. With sensors for card level monitoring Available with RS-232 interface. Description Note Model/Type CCM-4000 card collector Card magazine 2 exchange cartridges Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic card 3 tracks simultaneous reading + encoding HiCo and/or LoCo  Optional switch  Chip card reading + encoding ISO 7816 / 8 contacts  RFID reading + encoding ISO 14443 Mifare or comp. Card magazine capacity 2 x 300, 2 x  500 cards Interface RS-232, TTL Magazine sensor Yes Magazine inside Magazine full Yes Card capture function Yes Captrue card box Yes (30 cards) Shutter optional Bezel optional  Dimensions Hybrid: Magnetic, Chip, RFID 2 x 300 cards 287 x 364 x 395 mm 2 x 500 cards 287 x 364 x 455 mm Only RFID reader 2 x 300 cards 287 x 281 x 395 mm 2 x 500 cards 287 x 281 x 455 mm Bezel + 17 mm Shutter + 44 mm  Power consumption DC 24V, 3A "

CCM-5000 Card collector with encoder and 2 security cartridges CCM-5000 Card collector The CCM-5000 card collector with encoder for magnetic, chip and RFID cards. With two security cartridges for up to 1.000 cards. This collector was designed with special secutity features, appropriate to the CIM-5000 card dispenser. The security cartridges are particularly suitable for value cards like prepaid, gift cards etc. and also have their own memory and ID. The cartridges can not be opened manually (without damaging them), but only mechanically with the CIM-5000. This ensures the loss-free transportation and storage of value cards. The device allows an intelligent monitoring of all card processes through several build-in sensors. They report a critical cared quantity and also if a cartridge is empty. Further defective cards can be sorted out and put in a separate capture card box. The CCM-5000 card collector with encoder and security cartridge for up to 1.000 cards. The device and read and encode magnetic, chip and RFID cards. Card can also be sorted out in case they are defective and stored in a separate box. With automatic baudrate change (9.600-19.200 bps) over the interface. Intelligent monitoring of all card processes. With build in sensors for: card level, card empty and capture card box. The unique clutch system ensures the card separation. Card thickness is adjustable from 0,76 - 1,0 mm. Available with the interface RS-232. Description Note Model/Typ CCM-5000 Card collector Card magazine Exchange cartridge Security cartridge Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards 3 Spuren reading+encoding HiCo+LoCo, ISO 7810-13 Chip cards reading+encoding ISO 7816 RFID cards reading+encoding ISO 14443A Mifare contactless chip cards Card magazine capacity 2 x 200, 2 x 300 , 2 x 4002 x 500, 2 x 750 cards Interface RS-232 Card empty sensor Ja Low card warning sensor 20, 40, 60, 80, 100 Karten/optional Card capture function Yes Capture card box Yes (30 Karten ) for defective cards Card level sensor box Yes Weiter Optionen Card Drop Version Longlife magnetic head Bezel or Shutter Housing Version &nbsp\"

CDC-1000 Card dispenser with collector and RFID CDC-1000 The CDC-1000 card dispenser with collector and RFID card reader and encoder. This dispenser can also collect cards and lead them back in the card magazine, so they can be dispensed again. In case a card is defective, the system will sort it out and store it in a separate box. The optional card reader/encoder can process RFID cards ISO 14443. Further options are a bezel or a shutter (against dirst and vandalism). Available with the interfaces RS-232 or RS-422. The CDC-1000 card dispenser and collector for up to 100 cards. Optional with RFID reader/encoder for ISO 14443 cards. Further options are a bezel or a shutter (against dirt and vandalism). With sensors for low-card and magazine empty warning. Defecitve cards will be sorted out by the dispenser into a box. Available with the interfaces RS-232 or RS-422. Description Note Model/Type CDC-1000 card dispenser and collector Card magazine Stacker Card transportation Roller RFID cards reading + encoding ISO 14443 Mifare or compatible Card thickness 0,76 - 1,0 mm  Card size ISO 7810 85,725 x 53,975 mm Card magazine capacity 100 (0,76 mm) Interface RS-232, RS-422 Card empty sensor Yes Low card warning sensor Yes Card capture function Yes  defective cards Capture card box optional Bezel optional Shutter optional Dimensions 99 x 270 x 195 mm Bezel + 17,4 mm Shutter +44 mm  Power consumption DC 24V (+-5%) "

CIS-1000 Card dispenser with encoder and collector CIS-1000 The CIS-1000 Card dispenser with collector and encoder for RFID cards ISO 14443. This encoding station was developed for high amount card encoding. This device can read and encode magnetic, chip and RFID cards. The cards are filled in the dispenser, then are processed in the encoder and after that transfered into the collector. Each card magazine has a capacity of 500 cards (0,76 mm). In case a card is defective, this card will be sorted out and put in a capture card box.  The integrated sensors gives warning if a magazine is full or empty. This encoding station is available with an RS-232 interface. CIS-1000 encoding station for magnetic, chip and RFID cards. With card dispenser and collector, each 500 card capacity. Defecitve cards can be sorted out with the card capture function. This cards are stored in a separate box. Integrated sensors monitors magazines full or empty. Available with the interface RS-232. Description Note Model/Type CIS-1000 Encoding station Card magazine Stacker Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm  Magnetic cards ISO 7811 3 track reading + encoding LoCo optional HiCo Chip cards ISO 7816 8 contacts reading + encoding  RF-Karten ISO 14443A Mifare or comp. Card magazine capacity Card dispenser : 200, 300, 500 Card collector: 200, 300, 500  cards Interface RS-232 Card empty sensor Yes Card dispenser Magazine full sensor Yes Card collector Card capture function Yes Capture card box Yes (30 cards ) for defective cards Capture card box sensor Yes  Dinemsions Magnetic, Chip, RF 200 cards 154 x 652 x 283 mm 300 cards 154 x 652 x 359 mm 500 cards 154 x 652 x 503 mm only RFID 200 cards 154 x 625 x 296 mm 300 cards 154 x 625 x 372 mm 500 cards 154 x 625 x 516 mm  Power consumption DC 24V (+-5%) "

CIS-2000 Card dispenser with encoder and collector CIS-2000 The CIS-2000 card dispenser with encoder for magnetic, chip and RFID cards and card collector. This encoding station is suitable for high amount card processing. The two exchange cartridges enables a quick and easy filling/emptying of the device. With 500 cards capacity (0,76 mm) for high speed card processing. For card encoding, the cards are filled into the dispenser, transfered into the encoder, checked and forwarded into the collector. If a card is defective, it will be sorted out by the card capture function of the device. This card will be store in a separate box. The integrated sensors gives warning in case a card magazine is empty/full. Available with the interface RS-232. CIS-2000 card dispenser, encoder and card collector. This encoding station is suitable for magnetic, chip and RFID cars. Optionally also available with housing. With build in sensors for card level monitoring. With card capture function for defective cards. Separate box for sorted out cards (capture card box). Available with the interface RS-232 . Description Note Model/Type CIS-2000 Card encoding station Card magazine Exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 7811 3 tracks reading + encoding LoCo optional HiCo Chip card ISO 7816, 8 Kontakte tracks reading + encoding RFID cards ISO 14443A Mifare oder komp. tracks reading + encoding Card magazine capacity Card dispenser: 200, 300, 500 Card collector: 200, 300, 500 cards Interface RS-232 Card empty sensor Yes Dispenser Magazine full sensor Yes Collector Card capture function Yes Capture card box Yes (30 cards) defective cards Sensor capture card box Yes Dimensions 200 cards 168 x 625 x 339 mm 300 cards 168 x 625 x 415 mm 500 cards 168 x 625 x 568 mm Power consumption DC 24V (+-5%) "

CIS-4000 Card dispenser, encoder and collector with 4 exchange cartridges CIS-4000 The CIS-4000 card dispenser, encoder and collector is an encoding station for high amounts of cards. Suitable for encoding of magnetic, chip and RFID cards. With 4 exchange cartridges for up to 1.000 cards (2 x 500 dispenser + 2 x 500 collector). This cartriges allows a quick and easy refilling/emptying of the device. The CIS-4000 is available as build-in version or in housing. In case a card shoulb be defective, the encoding station will sort it out and store it in a seprarte box (capture card box). The integrated sensors gives warning if a card magazine is empty (dispenser) or full (collector). Available with RS-232 interface. The CIS-4000 card dispenser with encoder and collector. For magnetic, chip and RFID card processing. For high amount card processing, up to 1.000 cards. With exchange cartridges for quick and easy filling/emptying. With build in sensors for card level monitoring in the cartridge. As build-in or housing version available. With card capture function to sort out defective cards. With separate box for defective cards. Available with the interface RS-232. Description Note Model/Type CIS-4000 Card encoding station Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magnetic cards ISO 78113 Spuren reading + encoding LoCo optional HiCo Chip cards ISO 7816 8 Kontakte reading + encoding RFID cards ISO 14443A Mifare or comp. reading + encoding Card magazine capacity Dispenser:2x 200, 2 x 300, 2 x 500 Collector: 2x 200, 2 x 300, 2 x 500 cards Interface RS-232 Card empty sensor Yes Dispenser Magazine full sensor Yes Collector Card capture function Yes Capture card box Yes (30 cards) defective cards Card level sensor capture box Yes Dimensions Power consumption DC 24V (+-5%) "

CMT-1000 Card collector for up to 500 cards CMT-1000 Card collector The CMT-1000 Card collector for up to 500 cards. The magazine capacity is selectable from 100 up to 500 (0,76 mm) cards. For plastic card with a thickness between 0,2 -1,0 mm. Optional card transportation with rubber roller or with push-type mechanism. With very compact and robust structure for long-life with low-maintenance. Available with the interfaces RS-232 or TTL. The CMT-1000 card collector for up to 500 cards (0,76 mm). Very compact and robust structure for long-life with low-maintenance. Optional with rubber roller or push-type mechanism. For plastic cards with thickness between 0,22 - 1,0 mm, ISO 7810. Available with the interfaces RS-232 or TTL. Description Note Model/Type CMT-1000 card collector Card magazine Stacker Card transportation Roller or push-type Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Card magazine capacity 100, 200, 300, 500 cards Interface RS-232, TTL Card empty sensor Yes Magazine full warning Yes Bezel optional Dimensions Roller version 100 cards 92 x 155 x 200 mm 200 cards 92 x 155 x 280 mm 300 cards 92 x 155 x 360 mm 500 cards 92 x 155 x 520 mm Push-type version 100 cards 92 x 145 x 200 mm 200 cards 92 x 145 x 280 mm 300 cards 92 x 145 x 360 mm 500 cards 92 x 145 x 520 mm Bezel + 17 mm  Power consumption DC 24V (+-5%) "

CMT-1010 Card collector with exchange cartridge for up to 500 cards CMT-1010 Card collector The CMT-1010 Card collector with exchange cartridge for up to 500 cards (0,76 mm). With selectable card magazine capacity between 200 up to 500 cards. The exchange cartridge allows a quick and easy emptying of the collecotr. For plastic cards with thickness between 0,76 - 1,0 mm. The card transportation happens with material friendly rubber roller, to prevent scratches on the card surface. With very compact and robust structure for long-life with low-maintenance. The CMT-1010 is available with the interfaces Rs-232 or TTL. The CMT-1010 card collector with exchange cartridge for up to 500 cards (0,76 mm). Very compact and robust structure for long-life with low-mainenance. With roller for material friendly card processing. For plastic cards with thickness between 0,76 - 1,0 mm, ISO 7810. Available with the interfaces RS-232 or TTL. Description Note Model/Type CMT-1000 Kartensammler Card magazine Wechselmagazin Card transportation Roller Card thickness 0,76 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magazine capacity 200, 300, 500 cards Interface RS-232, TTL Card empty sensor Yes Magazine full sensor Yes Bezel optional Dimensions Roller transportation 200 cards 94 x 166 x 280 mm 300 cards 94 x 166 x 356 mm 500 cards 94 x 166 x 509 mm Bezel+ 17 mm Power consumption DC 24V (+-5%) "

CMT-1100 Card collector wiht 2 exchange cartridges CMT-1100 Card collector The CMT-1100 Card collector wiht 2 exchange cartridges for up to 1.000 cards (0,76 mm). The compact device is available with stacker type card magazine or exchange cartridges. The exchange cartridges allows a quick and easy emptying of the collector. Both magazines are controllable separately, to ensure a continuous collecting until both magazines are full. As soon as a magazine is full, the integrated sensor gives a warning. The robust and compact design of the CMT-1100 ensures a long-life with low-maintenance. CMT-1100 Card collector with 2 magazines for up to 1.000 cards (0,76 mm). With exchange cartridges for quick and easy emptying. With separately controllable card magazines. Buil in sensors for cartridge full or empty warning. Available with the interface RS-232. Description Note Model/Type CMT-1100 Card collector Card magazine Exchange cartridges Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 85,725 x 53,975 mm Magazine capacity 2 x 300 , 2 x  500 Interface RS-232 Magazine full sensor Yes Magazine empty sensor Yes Dimensions 2 x 300 cards 274 x 172 x 380 mm 2 x 500 cards 274 x 172 x 530 mm Power consumpion DC 24V (+-5%) "

CMT-2200 Card collector with exchange cartridge prepared for RFID CMT-2200 Card collector The CMT-2200 Card collector for up to 500 cards. Available as stacker version or with exchange cartridges. The collector is also able to sort cards out in case they are defective and drop them under the device (e.g. separate box). Furhter the CMT-2200 is prepared for external modules like RFID card reader. Another option is the card-drop function. The integratet sensors monitors the card level and give a warning in case the magazine is full. The CMT-2200 Card collector for up to 500 cards (0,76 mm). As stacker version or with exchange cartridges. With card capture function to sort out e.g. defective cards. Prepared for external modules like RFID card reader. With card drop option. Sensors for card magazine monitoring and magazine full warning. Available with RS-232 interface. Description Note Model/Type CMT-2600 card collector Card magazine Stacker or exchange cartridge Card transportation Roller Card thickness 0,22 - 1,0 mm Card size ISO 7810 /  85,725 x 53,975 mm Magazine capacity 100, 200, 300, 500 cards Interface RS-232 Card level sensor Yes Magazine full sensor Yes Card capture function Yes Dimensions Stacker Version 100 cards 150 x 302 x 206 mm 200 cards 150 x 302 x 286 mm 300 cards 150 x 302 x 366 mm 500 cards 150 x 302 x 526 mm Exchange cartridge version 100 cards NOT AVAILABLE 200 cards 150 x 312 x 286 mm 300 cards 150 x 312 x 366 mm 500 cards 150 x 312 x 526 mm Bezel++17 mm Power consumption DC 24V (+-5%), 2,5 mA, Standby 44 mA "